5.6 Management Setup Menu

After initially logging onto the system, you can use this menu to configure access rights. You should set user names and passwords (User Configuration). Remember to record them in a safe place. You should also set the community string which controls access to the on-board SNMP agent via in-band management software (SNMP Configuration). The items provided by the Management Setup Menu are described in the following sections.

Menu

Description

Network Configuration

Includes IP setup * and HTTP setup for the on-board Web agent.

Serial Port

Sets communication parameters for the serial port, including baud rate, console

Configuration

time-out, and screen data refresh interval. (See “Configuring the Serial Port”)

SNMP Configuration

Activates authentication failure traps; and configures communities and trap

 

managers.

User Configuration

Sets the user names and passwords for system access.

TFTP Download

Downloads new version of firmware to update your system (in-band).

Configuration File

Saves or restores configuration data based on the specified file.

 

 

* Only displays on WGS3-2620 when it is set to Layer 2 mode.

WGS3 Layer 3 Switch User’s Manual

- 145 -