TFTP Download | Downloads new version of firmware to update your system |
Configuration File | Download the VLAN and routing configuration to a file or upload the |
| configuration file to the switch. |
| Device Control Menu | |
|
|
System Mode *3 | Sets the switch to operate as a Layer 2 switch or as a multilayer routing |
| switch. |
Layer 2 Menu | Configures port communication mode, mirror ports, port trunking and |
| static unicast/multicast address. |
Bridge Menu | Configures GMRP and GVRP for the bridge, and STA for the global |
| bridge or for specific ports. |
VLAN Menu | Configures VLAN settings for specific ports, and defines the port |
| membership for VLAN groups. |
IGMP Snooping | Configures IGMP multicast filtering. |
Configuration *1 |
|
IP Menu *2 | Configures the subnets for each VLAN group, global configuration for |
| unicast and multicast protocols, BOOPP/DHCP relay, static ARP table |
| entries, static routes and the default route. |
Security | Restrict access through MAC address or IP address *2 |
Jumbo Packet Menu *4 | Allows the switch to send jumbo packet up to 9k |
| Network Monitor Menu | |
|
|
Port Statistics | Displays statistics on port traffic, including information from the |
| Interfaces Group, |
Layer 2 Address Table | Contains tables for all unicast, static unicast, and static multicast |
| addresses, as well as the filter table for MAC addresses. |
Bridge Menu | Displays Spanning Tree Bridge and Port information |
VLAN Menu | Displays dynamic port registration information for VLANs, as well as all |
| VLAN forwarding information for static and dynamic assignment. |
IP Multicast | Displays all the multicast groups active on this switch, including the |
Registration Table *1 | multicast IP addresses and corresponding VLANs. |
IP Menu *2 | Displays all the IP subnets used on this switch, as well as the |
| corresponding VLANs and ports. Also contains the ARP table, routing |
| table and multicast table. |
| System Restart | Restarts the system with options to reload factory defaults. |
| Menu |
|
| Exit | Exits the configuration program. |
*1: Only displays on
*2. Only displays on
*3. Only displays on
*4. Only displays on
WGS3 Layer 3 Switch User’s Manual | - 16 - |