Parameter | Description |
Type | Shows port type as: |
| |
| |
Admin Status | Shows if the port is enabled, or has been disabled due to abnormal behavior or for |
| security reasons. See “Configuring Port Parameters”. |
Link Status | Indicates if the port has a valid connection to an external device. |
Speed Status | Indicates the current port speed. |
Duplex Status | Indicates the port’ s current duplex mode. |
Flow Control Status Shows the flow control type in use. Flow control can eliminate frame loss by “blocking” traffic from end stations
| connected directly to the switch. |
VLAN ID | The VLAN ID assigned to untagged frames received on this port. Use the PVID to |
| assign ports to the same untagged VLAN. |
|
|
WGS3 Layer 3 Switch User’s Manual | - 138 - |