5.7.1 Layer 2 Menu

The Layer 2 menu contains options for port configuration, port mirroring, and port trunking. These menu options are described in the following sections.

Menu

Description

Port Configuration

Enables any port, enables/disables flow control, and sets communication mode to

 

auto-negotiation, full duplex or half duplex.

Mirror Port

Sets the source and target ports for mirroring.

Configuration

 

Port Trunking

Specifies ports to group into aggregate trunks.

Configuration

 

Static Unicast

Used to manually configure host MAC addresses in the unicast table.

Address Table

 

Static Multicast

Used to manually configure host MAC addresses in the multicast table.

Address Table

 

 

 

5.7.1.1 Configuring Port Parameters

Use the Port Configuration menu to display and Edit icon to set communication parameters for any port on the switch, including administrative status, auto-negotiation, default communication speed and duplex mode, as well as flow control in use.

Click , the following table will be show to allow setting each port’s parameter.

WGS3 Layer 3 Switch User’s Manual

- 155 -