Polycom IP 5000 manual Ending PTT Broadcasts

Models: IP 5000 5000

1 76
Download 76 pages 50.15 Kb
Page 49
Image 49

Polycom® SoundStation® IP 5000 Phone User Guide

During a waiting period, you can press and hold the Talk soft key and talk to all the people listening on the channel. When you finish talking, release the Talk soft key. The broadcast will enter another waiting period until someone broadcasts again. If no activity occurs within the waiting period, the channel closes and no more broadcasts can take place.

Ending PTT Broadcasts

You can end a PTT broadcast by releasing the Talk soft key, or by pressing the End PTT soft key. After you end a broadcast, the channel remains open so others can respond.

If you release the Talk soft key without pressing the End PTT soft key:

You can resume the broadcast by pressing and holding the Talk soft key (if the broadcast is in a wait period).

You can’t initiate another broadcast on another channel until the waiting period ends.

If you press the End PTT soft key:

You can’t resume the broadcast by pressing and holding the Talk soft key.

You can immediately initiate another broadcast on another channel.

Adjusting the Volume of PTT Broadcasts

You can adjust the volume of PTT broadcasts while they play. During a

broadcast, press to adjust the volume of the broadcast.

If you adjust the volume of a non-emergency broadcast, your phone retains the adjusted volume for all subsequent non-emergency broadcasts. However, only system administrators can adjust the volume level of an Emergency broadcast.

Muting PTT Broadcasts

While you send a broadcast, you can press to mute your audio so that the people receiving your broadcast won’t hear anything. This behavior is similar to a phone call.

Updating the Default Channel

If you press and hold the Talk soft key, your broadcast will automatically transmit on the default channel, Channel 1. If you want, you can change the default channel.

43

Page 49
Image 49
Polycom IP 5000 manual Ending PTT Broadcasts