Polycom® SoundStation® IP 5000 Phone User Guide

2.From the PTT Channel Configuration screen, select Accept While Busy, and enable or disable the setting.

The default setting is Disabled. When enabled, your phone will accept and play broadcasts while you’re in an active call. When disabled, your phone won’t play broadcasts while you’re in a call, but will hold them instead.

3.Press to save your change.

Group Paging Mode

Your system administrator may enable your phone to operate in a broadcast mode called Group Paging mode. In this mode, you broadcast one-way announcements to a specified group of phones, called a Paging Group. In Group Paging mode, users must subscribe to Paging Groups to send and receive pages.

Sending and Receiving Pages

To send and receive pages, you need to subscribe to certain Paging Groups. By default, you’re subscribed to Paging Groups 1, 24, and 25. This means that you can send and receive pages to Paging Groups 1, 24, and 25.

Sending Pages

By default, when you send a group page, it’s automatically sent to Paging Group 1. This is your default paging group.

You can change your default paging group to any group you want (see Updating the Default Paging Group on page 47). If you change your default paging group, you’re automatically subscribed to it.

You can’t send a Page-mode page while you’re in an active call.

To send a page:

1.To send a page, press the Paging soft key.

To automatically send a page to the default paging group, press and hold the

Paging soft key, and then go to step 4.

2.From the Paging Groups List screen, select the paging group to send the page to.

The list displays the default paging group, the most recent group you paged, and other paging group that you can page.

45

Page 51
Image 51
Polycom IP 5000 manual Group Paging Mode, Sending and Receiving Pages