46 Powerware 9315 (200 kVA---300kVA) Opera tion
164201036 Rev.D 041500
Ter m in al M o de
In this mode, system events are continually logged through the serial port to the
device connected to the port. Port 2 operates by default in Terminalmode.
The printed log entries contain a time and date stamp and the alarm text message.
Terminalmo de uses this format for printing alarm entries:
MMM DD HH:MM:SS.hh KYWD MESSAGE :::: <CF> <LF>
Symbol Description
MM Month (3 letters)
DD Day (2 digits)
HH Hour (2 digits)
MM Minute (2 digits)
SS Second (2 digits)
hh Hundredths of Second (2 digits)
KYWD Keyword (ALARM, NOTICE, COMMAND, or STATUS)
:::: System Diagnostic Information
<CF> CarriageReturn Character (ASCII 13)
<LF> Line Feed (ASCII 10)
An alarm message is prefixed by the word “CLEAR” whenever an alarm is entered into
the Event History Log with a clearedstatus.

Printing Selected Information

If a port is operating in Terminal mode and is connected to a computer, you can
use key combinations at any time to print only selected information:
Ctrl+P Prints the entire log with a header
Ctrl+M Prints the current system meters witha header
Ctrl+A Prints all system information
Ctrl+B Prints Battery TestLog
Touse a key combination, hold down the Control key and press the letter key.