Precor 5.33, 5.23 manual Shows the degree of incline for each CrossRamp setting

CROSSRAMP ▲ ▼ (EFX5.23):

Press and hold the CROSSRAMP arrows to increase or decrease the ramp incline from 1 to 20.

Changes to the ramp incline are not immediate. It takes time for the lift to reach the target incline shown on the display.

Important: Ramp changes occur only when the foot pedals are in motion. The number that appears on the display indicates the selected range, not the degree of

Column height

Incline Setting

15 – 20

13 – 14

11 – 12

9 – 10

7 – 8

4 – 6

1 – 3

incline. There is not a one-to-one relationship between the degree of incline and the CrossRamp setting.

Table 3 shows the degree of incline for each CrossRamp setting.

Table 3. Incline movement

Unit	Incline Setting	Degree of Incline
EFX5.23	1 through 20	13° through 40°
EFX5.33	Stationary	Fixed at 20°

The incline setting affects the column height in the program profile as shown in Diagram 8.

Diagram 8: Column height affected by changes in incline

Note: During the setup phase, pressing the CROSSRAMP arrow keys will not affect the ramp incline. However, the arrow keys do affect what appears on the display. Refer to Selecting a Program.

Owner’s Manual: Display Console 18