Roland XV-5080 Setting the Midi Channel, Making the System Exclusive, Settings, Receive Switch

Chapter 9 Other Settings/Status Checks

Setting the MIDI Channel	GM System ON (Receive GM-ON Exclusive
The XV-5080 produces sound, and can change its internal	Switch)
	Specifies whether GM-ON (General MIDI System On)
settings in response to MIDI messages that it receives from
	messages will be received (ON), or not (OFF).
other devices. In order for this to occur, the MIDI
transmission channels of the external device must match the	GM2 System ON (Receive GM2-ON Exclusive
MIDI reception channels of the XV-5080.	Switch)
MIDI Receive Ch (MIDI Receive	Specifies whether GM Level2-ON (General MIDI Level 2
	System On) messages will be received (ON), or not (OFF).
Channel)	GS Reset (Receive GS Reset Exclusive Switch)
Perf Ctl Ch (Performance Control Channel)
	This specifies whether GS Reset messages will be received
When changing Performances by MIDI messages from the
	(ON), or not (OFF).
external device, set the transmit channel of the external
device and this channel to the same channel.	Making the System Exclusive
* When you perform a Factory Reset operation, Perform Ctrl Ch
	Settings
is reset to “16.”
Patch/Rhy Rx Ch (Patch/Rhythm Set Receive	System Exclusive
Channel)	Device ID (Device ID Number)
Set this channel to use an external MIDI device (such as a
	Range: 17–32
MIDI keyboard) for playing Patches and Rhythm Sets, or to
have Patches or Rhythm Sets changed as the result of MIDI	When transmitting or receiving System Exclusive messages,
messages.	set this parameter to match the device ID number of the other
	MIDI device.
Setting the MIDI Transmit/	Receive Sw (Receive System Exclusive Switch)
Receive Switch	Specifies whether System Exclusive messages will be
MIDI Tx (MIDI Transmit)	received (ON), or not (OFF).
Edit Data (Transmit Edit Data Switch)	Specifying the Reception Status
When Patch, Performance or Rhythm Set settings are	for Each Tone
modified, you can specify whether the modified settings will	You can enable or disable the response to received MIDI
be transmitted as System Exclusive data (ON), or not (OFF).
	messages for each Part of a Performance, each Tone of a
Rx Switch (Receive Switch)	Patch, and each Rhythm Tone of a Rhythm Set.
	For more information about setting the MIDI response of
Program Chg (Receive Program Change	Parts in a Performance, check out “Establishing a Part’s MIDI
Switch)	Settings (MIDI) (p. 164).”
Specifies whether Program Change messages will be	For more information about the settings for a Patch, refer to
received (ON), or not (OFF).	“MIDI Rx Switch (MIDI Receive Switch)” (p. 147).
Bank Select (Receive Bank Select Switch)	For more about setting the MIDI response of Rhythm Tones
	in a Rhythm Set, refer to “Other Settings (CONTROL)/Rx
Specifies whether Bank Select messages will be received	MIDI (Receive MIDI)” (p. 179).
(ON), or not (OFF).

212