Roland XV-5080 owner manual Making Overall Settings, Setup, 208

Chapter 9 Other Settings/Status Checks

Settings Common to the Entire XV-5080 ([SYSTEM/ UTILITY] - [F1 (General)])

fig.09-001.e_70

Setting Procedure:

1.Press [SYSTEM/UTILITY], getting the indicator to light.

*If the indicator is blinking, you are in UTILITY mode. Press [SYSTEM/UTILITY] once again to make its indicator light.

2.Press [F1 (General)] several times to call up the SYSTEM General #1 page.

3.Press [ ]/[ ]/[ ]/[ ] to move the cursor to the parameter you want to set.

4.Turn the VALUE dial or by press [INC]/[DEC], to select the desired value.

*If you’ve made a mistake, simply press [UNDO]. The value of the parameter will be restored to what it was when you first positioned the cursor there.

5.Press [EXIT] to return to the applicable PLAY page.

Making Overall Settings

Setup

LCD Contrast

Range: 1–10

This adjusts the contrast/brightness of the display. Higher values will make the characters darker.

Patch Remain (Patch Remain Switch)

This specifies whether you want the notes that are sounding to remain (ON) or turn off (OFF) when you select a new Patch or Rhythm Set in Patch mode.

In addition, when “ON” is selected, the Volume and Pan data, and the Key Mode and other settings received via MIDI (CC 5, 7, 10, 65, 68, 71–74, RPN 0, 1, 2, MONO ON, POLY ON) are passed on.

Powerup Mode

Sets the condition of the XV-5080 when its power is turned on.

Available Settings:

DEFAULT: The XV-5080 will be ready to play Patch “USER:001.”

LAST: The XV-5080 will power up exactly as it was when it was turned off.

Character Style

Select the style of the large characters that are displayed in the various Play pages (number and name display).

TYPE 1: Bold mono-spaced characters

TYPE 2: Light mono-spaced characters

TYPE 3: Bold proportionally-spaced characters

TYPE 4: Light proportionally-spaced characters

Rhythm Edit Key

You can set whether you’ll be able to select percussion instruments for editing only by operating the XV-5080’s front-panel controls or also by pressing keys on a connected MIDI keyboard.

Available Settings:

PANEL: Percussion instrument sounds can be selected only by using the XV-5080’s TONE SELECT [1]–[4]. PANEL&MIDI: Percussion instrument sounds can be selected using the XV-5080’s TONE SELECT [1]–[4] and by pressing a key on a connected MIDI keyboard.

If you’d like to select percussion instruments using the XV- 5080’s [E]–[H] buttons while playing the sounds on a MIDI keyboard, select “PANEL.”

SCSI Probe Time

This sets the time spent in recognizing connected SCSI devices. The higher the value set, the longer the time allowed. Ordinarily, this is set to “1.”

Settings values: 1-10

*If the connected SCSI device is not being recognized, set a higher value, then following the instructions in “Turning Off the Power” in Quick Start (P.12), turn off the XV-5080’s power. After this, follow the instructions in “Turning On the Power” in Quick Start (P.12) to turn on the power in the proper sequence.

208