Roland XV-5080 owner manual Chorus/Delay, Flanger/Delay, Chorus/Flanger

Chapter 2 Using the XV-5080 Effects

Depth (Flanger Depth)

Adjust the modulation depth of the flanger effect.

Feedback (Flanger Feedback Level)

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

Balance (Flanger Balance) #

Adjust the volume balance between the chorus sound and the chorus sound that is passed through the flanger. With a setting of “D100: 0W,” only the chorus sound will be output. With a setting of “D0: 100W,” only the chorus sound that passes through the flanger will be output.

Output

Level (Output Level)

Adjust the output level.

38: CHORUS/DELAY

This effect connects a chorus and a delay in parallel. The parameters are the same as for “35: CHORUS→ DELAY.” However, the Delay Balance parameter adjusts the volume balance between the direct sound and the delay sound.

Balance D

L in L out

Chorus Balance W

Feedback

Delay Balance W

R in R out

Balance D

39: FLANGER/DELAY

This effect connects a flanger and a delay in parallel. The parameters are the same as for “36: FLANGER→ DELAY.” However, the Delay Balance parameter adjusts the volume balance between the direct sound and the delay sound.

Balance D

L in L out

Flanger Balance W

Feedback

Feedback

Delay Balance W

R in R out

Balance D

40: CHORUS/FLANGER

This effect connects a chorus and a flanger in parallel. The parameters are the same as for “37: CHORUS→ FLANGER.” However, the Flanger Balance parameter adjusts the volume balance between the direct sound and the flanger sound.

Balance D

L in L out

Chorus Balance W

Feedback

Flanger Balance W

R in R out

Balance D

64