Roland XV-5080 owner manual 285

●OMNI OFF (Controller number 124)

Status	2nd byte	3rd byte
BnH	7CH	00H

n = MIDI channel number:0H - FH (Ch.1 - 16)

*The same processing will be carried out as when All Notes Off is received.

●MNI ON (Controller number 125)

Status	2nd byte	3rd byte
BnH	7DH	00H

n = MIDI channel number: 0H - FH (Ch.1 - 16)

*The same processing will be carried out as when All Notes Off is received. OMNI ON will not be turned on.

●MONO (Controller number 126)

Status	2nd byte	3rd byte
BnH	7EH	mmH

n = MIDI channel number:0H - FH (Ch.1 - 16) mm = mono number:00H - 10H (0 - 16)

*The same processing will be carried out as when All Notes Off is received.

*In Performance mode, the Part Mono/Poly parameter (PERFORM/PART) will change.

●POLY (Controller number 127)

Status	2nd byte	3rd byte
BnH	7FH	00H

n = MIDI channel number: 0H - FH (Ch.1 - 16)

*The same processing will be carried out as when All Notes Off is received.

*In Performance mode, the Part Mono/Poly parameter (PERFORM/PART) will change.

■System Realtime Message

●Timing Clock

Status

F8H

*This message will be received if the Clock Source parameter (SYSTEM/COMMON) is MIDI.

●Active Sensing

Status

FEH

*When Active Sensing is received, the unit will begin monitoring the intervals of all further messages. While monitoring, if the interval between messages exceeds 420 ms, the same processing will be carried out as when All Sounds Off, All Notes Off and Reset All Controllers are received, and message interval monitoring will be halted.

■System Exclusive Message

Status	Data byte	Status
F0H	iiH, ddH, ......,eeH	F7H
F0H:	System Exclusive Message status
ii = ID number:	an ID number (manufacturer ID) to indicate the manufacturer whose
Exclusive message this is. Roland's manufacturer ID is 41H.
	ID numbers 7EH and 7FH are extensions of the MIDI standard;
Universal Non-realtime Messages (7EH) and Universal Realtime Messages (7FH).
dd,...,ee = data:	00H - 7FH (0 - 127)
F7H:	EOX (End Of Exclusive)

Of the System Exclusive messages received by this device, the Universal Non-realtime messages and the Universal Realtime messages and the Data Request (RQ1) messages and the Data Set (DT1) messages will be set automatically.

●Universal Non-realtime System Exclusive Messages

❍Identity Request Message

Status	Data byte	Status
F0H	7EH, dev, 06H, 01H	F7H
Byte	Explanation
F0H	Exclusive status

MIDI Implementation

7EH	ID number (Universal Non-realtime Message)
dev	Device ID (dev: 00H - 1FH (1 - 32), the initial value is 10H (17).)
06H	Sub ID#1 (General Information)
01H	Sub ID#2 (Identity Request)
F7H	EOX (End Of Exclusive)

*When this message is received, Identity Reply message (p. 289) will be transmitted.

❍GM1 System On

Status	Data byte	Status
F0H	7EH, 7FH, 09H, 01H F7H
Byte	Explanation
F0H	Exclusive status
7EH	ID number (Universal Non-realtime Message)
7FH	Device ID (Broadcast)
09H	Sub ID#1 (General MIDI Message)
01H	Sub ID#2 (General MIDI 1 On)
F7H	EOX (End Of Exclusive)

*When this messages is received, this instrument will turn to the GM1 mode.

*Not received when the Receive GM1 System On parameter (SYSTEM/COMMON) is OFF.

❍GM2 System On

Status	Data byte	Status
F0H	7EH 7FH 09H 03H	F7H
Byte	Explanation
F0H	Exclusive status
7EH	ID number (Universal Non-realtime Message)
7FH	Device ID (Broadcast)
09H	Sub ID#1 (General MIDI Message)
03H	Sub ID#2 (General MIDI 2 On)
F7H	EOX (End Of Exclusive)

*When this messages is received, this instrument will turn to the GM2 mode.

*Not received when the Receive GM2 System On parameter (SYSTEM/COMMON) is OFF.

❍GM System Off

Status	Data byte	Status
F0H	7EH,7F,09H,02H	F7H
Byte	Explanation
F0H	Exclusive status
7EH	ID number (Universal Non-realtime Message)
7FH	Device ID (Broadcast)
09H	Sub ID#1 (General MIDI Message)
02H	Sub ID#2 (General MIDI Off)
F7H	EOX (End Of Exclusive)

*When this messages is received, this instrument will return to the Performance mode.

●Universal Realtime System Exclusive Messages

❍Master Volume

Status	Data byte	Status
F0H	7FH, 7FH, 04H, 01H, llH, mmH	F7H
Byte	Explanation
F0H	Exclusive status
7FH	ID number (universal realtime message)
7FH	Device ID (Broadcast)
04H	Sub ID#1 (Device Control messages)
01H	Sub ID#2 (Master Volume)
llH	Master Volume lower byte
mmH	Master Volume upper byte
F7H	EOX (End Of Exclusive)

*The lower byte (llH) of Master Volume will be handled as 00H.

*The Master Level parameter (SYSTEM/COMMON) will change.

❍Master Fine Tuning

Status	Data byte	Status
F0H	7FH,7FH,04H,03H,llH,mmH	F7H

Appendices

285