Roland XV-5080 owner manual Signal Part Flow, 111, Part Output MFX Select, Available Settings A-C

Chapter 3 Selecting Output Jacks

Performance Mode Settings

Signal (PART) Flow

PART

Output Assign

A

B

C

D

M-FX

Output Assign

M-FX A

M-FX B

M-FX C

CHO

Chorus

Output Assign

REV

Reverb

Output Assign

OUTPUT A

OUTPUT B

OUTPUT C

OUTPUT D

Chap.3

Parameters

The parameters related to Part output settings are shown

below.

PERFORMANCE Effects General page ([PERFORM] - [F6 (Effects)] - [F1 (General)])

Sets the output destination and level for the selected Part, as well as its send level with respect to the Chorus and Reverb.

Part Output Assign

Available Settings:

MFX: The Part is sent into the Multi-effects. Its output destination is determined by the Multi-effects output

settings.

A–D:The Part is sent to the selected pair of OUTPUT A–D jacks.

1–8:The Part is sent to the INDIVIDUAL OUTPUT jacks 1–8.

PAT: The Part’s output destination is determined by the settings of the Patch or Rhythm Set assigned to the Part.

Part Output MFX Select

Available Settings: A–C

Selects which of the three Multi-effects is to be used.

Part Dry Send Level

Range: 0–127

Sets the level of the signal to be sent to the OUTPUT jacks, which is determined by Part Output Assign.

111