Roland XV-5080 owner manual FLANGER→ Delay, CHORUS→ Flanger, Balance #

Output

Level (Output Level)

Adjust the output level.

36: FLANGER→ DELAY

This effect connects a flanger and a delay in series.

Balance D
L in		L out
Feedback		Balance D
Flanger	Balance W	Balance W
		Delay
	Balance W	Balance W
		Feedback
R in		R out
Balance D		Balance D

Flanger

Pre Delay (Flanger Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

Rate (Flanger Rate)

Adjust the modulation speed of the flanger effect.

Depth (Flanger Depth)

Adjust the modulation depth of the flanger effect.

Feedback (Flanger Feedback)

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

Balance (Flanger Balance) #

Adjust the volume balance between the direct sound and the flanger sound. With a setting of “D100: 0W,” only the direct sound will be output. With a setting of “D0: 100W,” only the flanger sound will be output.

Delay

Time (Delay Time)

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Feedback (Delay Feedback)

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

HF Damp (Delay HF Damp)

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not want to cut the high frequencies of the delay feedback, set this parameter to

Chapter 2 Using the XV-5080 Effects

BYPASS.

Balance #

Adjust the volume balance between the flanger sound that is	.2Chap
sent through the delay and the flanger sound that is not sent
through the delay. With a setting of “D100: 0W,” only the
flanger sound will be output. With a setting of “D0: 100W,”
only the flanger sound that is sent through the delay will be
output.

Output

Level (Output Level)

Adjust the output level.

37: CHORUS→ FLANGER

This effect connects a chorus and a flanger in series.

Balance D	Balance D
L in	L out

Balance W	Feedback
	Balance W
Chorus	Flanger
Balance W	Balance W

R in	R out
Balance D	Balance D

Chorus

Pre Delay (Chorus Pre Delay Time)

Adjust the time delay from when the direct sound begins until the chorus sound is heard.

Rate (Chorus Rate)

Adjust the modulation speed of the chorus effect.

Depth (Chorus Depth)

Adjust the modulation depth of the chorus effect.

Balance (Chorus Balance) #

Adjust the volume balance between the direct sound and the chorus sound. With a setting of “D100: 0W,” only the direct sound will be output. With a setting of “D0: 100W,” only the chorus sound will be output.

Flanger

Pre Delay (Flanger Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

Rate (Flanger Rate)

Adjust the modulation speed of the flanger effect.

63