Roland XV-5080 owner manual 289, Universal Non-realtime System Exclusive Message

❍Panpot (Controller number 10)

Status	2nd byte	3rd byte
BnH	0AH	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Panpot:	00H - 40H - 7FH (Left - Center - Right),
Initial value = 40H (Center)

❍Portamento (Controller number 65)

Status	2nd byte	3rd byte
BnH	41H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

❍Resonance (Controller number 71)

Status	2nd byte	3rd byte
BnH	47H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv= Resonance value (relative change):00H - 7FH (-64 - 0 - +63)

❍Release Time (Controller number 72)

Status	2nd byte	3rd byte
BnH	48H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Release Time value (relative change):00H - 7FH (-64 - 0 - +63)

❍Attack time (Controller number 73)

Status	2nd byte	3rd byte
BnH	49H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Attack time value (relative change):00H - 7FH (-64 - 0 - +63)

❍Cutoff (Controller number 74)

Status	2nd byte	3rd byte
BnH	4AH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Cutoff value (relative change):00H - 7FH (-64 - 0 - +63)

❍Decay Time (Controller number 75)

Status	2nd byte	3rd byte
BnH	4BH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Decay Time value (relative change):00H - 7FH (-64 - 0 - +63)

❍Vibrato Rate (Controller number 76)

Status	2nd byte	3rd byte
BnH	4CH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Vibrato Rate value (relative change):00H - 7FH (-64 - 0 - +63)

❍Vibrato Depth (Controller number 77)

Status	2nd byte	3rd byte
BnH	4DH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Vibrato Depth Value (relative change):00H - 7FH (-64 - 0 - +63)

❍Vibrato Delay (Controller number 78)

Status	2nd byte	3rd byte
BnH	4EH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Vibrato Delay value (relative change):00H - 7FH (-64 - 0 - +63)

❍Effect 1 (Reverb Send Level) (Controller number 91)

Status	2nd byte	3rd byte
BnH	5BH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16) vv = Reverb Send Level:00H - 7FH (0 - 127)

❍Effect 3 (Chorus Send Level) (Controller number 93)

Status	2nd byte	3rd byte
BnH	5DH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16) vv = Chorus Send Level:00H - 7FH (0 - 127)

MIDI Implementation

❍RPN MSB/LSB (Controller number 100, 101)

Status	2nd byte	3rd byte
BnH	65H	mmH
BnH	64H	llH

n = MIDI channel number:0H - FH (Ch.1 - 16)

mm= upper byte (MSB) of parameter number specified by RPN ll = lower byte (LSB) of parameter number specified by RPN

<<< RPN >>>

Control Changes include RPN (Registered Parameter Numbers), which are extended When using RPNs, first the RPN (Controller numbers 100 and 101; they can be sent in any

This device receives the following RPNs.

RPN	Data entry
MSB, LSB	MSB, LSB	Notes
00H, 00H	mmH, llH	Pitch Bend Sensitivity
	mm:	00H - 18H (0 - 24 semitones)
	ll:	ignored (processed as 00H)
	Up to 2 octave can be specified in semitone steps.
	* In Performance	mode, the Part Pitch Bend Range parameter

(PERFORM/PART) will change.

00H, 01H	mmH, llH	Master Fine Tuning
	mm, ll:	20 00H - 40 00H - 60 00H (-8192*50/8192 - 0 -
		+8192 *50/8192 cent)
	* In Performance mode, the Part Fine Tune parameter (PERFORM/
	PART) will change.
00H, 02H	mmH, llH	Master Coarse Tuning
	mm:	10H - 40H - 70H (-48 - 0 - +48 semitones)
	ll:	ignored (processed as 00H)
	* In Performance mode, the Part Coarse Tune parameter (PERFORM/

PART) will change.

7FH, 7FH---, ---RPN null

RPN and NRPN will be set as "unspecified". Once this setting has been made, subsequent

Parameter values that were previously set will not change. mm, ll: ignored

●Program Change

Status	2nd byte
CnH	ppH

n = MIDI channel number:0H - FH (Ch.1 - 16)

pp = Program number:00H - 7FH (prog.1 - prog.128)

■System Exclusive messages

Universal Non-realtime System Exclusive Message" and Data Set 1 (DT1) are the only System Exclusive messages transmitted by the XV-5080.

●Universal Non-realtime System Exclusive Message

❍Identity Reply Message

Receiving Identity Request Message, the XV-5080 send this message.

Status		Data byte	Status
F0H		7EH, dev, 06H, 02H, 41H, 10H, 01H, 00H, F7H
		00H, 00H, 00H, 00H, 00H
Byte		Explanation
FOH		Exclusive status
7EH		ID number (Universal Non-realtime Message)
dev		Device ID (use the same as the device ID of Roland)
06H		Sub ID#1 (General Information)
02H		Sub ID#2 (Identity Reply)
41H		ID number (Roland)
10H	01H	Device family code
00H	00H	Device family number code
00H	00H 00H 00H Software revision level
F7H		EOX (End of Exclusive)

Appendices

289