Roland XV-5080 owner manual Nrpn LSB, MSB, Rpn Lsb, Msb

SYNTHESIZER MODULE		MIDI Implementation Chart				Date : May. 20, 2000
Model XV-5080						Version : 1.00
	Function...	Transmitted		Recognized		Remarks
Basic	Default	X		1–16
Channel	Changed	X		1–16
	Default	X		Mode 3
Mode	Messages	X		Mode 3, 4 (M = 1)		* 2
	Altered	**************
Note		X		0–127
Number :	True Voice	**************		0–127
Velocity	Note On	X		O
	Note Off	X		O
After	Key's	X		O	*1
Touch	Channel's	O	*7	O	*1
Pitch Bend		O	*7	O	*1

Control Change

0, 32	O	*4	O		*1	Bank select
1	O	*7	O		*1	Modulation
2	O	*7	O			Breath type
4	O	*7	O			Foot type
5	O	*4	O			Portamento time
6, 38	O	*4	O			Data entry
7	O	*4, *7	O		*1	Volume
10	O	*4, *7	O		*1	Panpot
11	X		O		*1	Expression
64	X		O		*1	Hold 1
65	O	*4	O			Portamento
66	X		O			Sostenuto
67	X		O			Soft
68	X		O			Legato Foot Switch
69	X		O			Hold 2
71	O	*4	O			Resonance
72	O	*4	O			Release Time
73	O	*4	O			Attack Time
74	O	*4	O			Cutoff
75	O	*4	O		*6	Decay Time
76	O	*4	O		*6	Vibrato Rate
77	O	*4	O		*6	Vibrato Depth
78	O	*4	O		*6	Vibrato Delay
80	X		O	(Tone 1 Level)		General Purpose Controller 5
81	X		O	(Tone 2 Level)		General Purpose Controller 6
82	X		O	(Tone 3 Level)		General Purpose Controller 7
83	X		O	(Tone 4 Level)		General Purpose Controller 8
84	X		O			Portamento control
91	O	*4	O	(Reverb)		General purpose effects 1
93	O	*4	O	(Chorus)		General purpose effects 3
1–5, 7–31, 64–95 *3	X		O			CC1, 2 (General purpose controller 1, 2)
1–5, 7–31, 64–95 *3	X		O			CC3, 4 (General purpose controller 3, 4)
98, 99	X		X			NRPN LSB, MSB
100, 101	O	*4	O			RPN LSB, MSB

Program

Change : True Number

System Exclusive

System	: Song Position
	: Song Select
Common
	: Tune Request
System	: Clock
Real Time : Commands
	: All Sound Off
Aux	: Reset All Controllers
	: Local On/Off
Messages
	: All Notes Off

: Active Sensing

: System Reset

Notes

O	*4	O	*1
**************		0–127	Program No. 1–128
O	*5	O	*1
X		X
X		X
X		X
X			*1
X		X
X		O (120, 126, 127)
X		O
X		X
X	*1	O (123–127)
O		O
X		X

* 1	O X is selectable.	* 5	Transmits when Data Transfer is excuted or RQ1
* 2	Recognized as M=1 even if M≠ 1.		received.
* 3	Can be changed settings.	* 6	GM Mode only.
* 4	Transmits when GM Data Transfer is excuted .	* 7	Transmits when Part Information value changed.

Mode 1	: OMNI ON, POLY	Mode 2	: OMNI ON, MONO	O : Yes
Mode 3	: OMNI OFF, POLY	Mode 4	: OMNI OFF, MONO	X : No