Roland XV-5080 owner manual 152, REV ONE Reverse One-shot

Chapter 4 Creating Patches

ONE SHOT:

The sample will be played back only once, from the Start point to the Loop End point.

	Loop	Loop
Start	Start P.	End P.

ALT (Alternate):

When the sample has been played back from the Start point to the Loop End point, playback will repeat to the Loop Start point, then go back and forth between the Loop Start point and the Loop End point.

	Loop	Loop
Start	Start P.	End P.

REV ONE (Reverse One-shot)

The sample will be played back only once from the Loop End point to the Start point in the reverse direction.

	Loop	Loop
Start	Start P.	End P.

REVERSE:

When the sample has been played back from the Loop End point to the Start point, it will be repeatedly played back in the reverse direction, from the Loop Start point to the Start point.

	Loop	Loop
Start	Start P.	End P.

Tune (Loop Tuning)

Range: -50–50

Determines the fine pitch setting within the loop, in one-cent

steps (1/100 of a semitone).

Start-Fine (Start Point - Start Point Fine)

•Start Point Range: 0–

Specifies the point in the sample from which data will be read.

•Start Point Fine Range: 0–255

This is a fine adjustment of the Start Point.

Loop Point Start-Fine (Loop Start Point - Loop Start Point Fine)

•Loop Start Point Range: 0–

Specifies the point in the sample from which the loop will be started.

•Loop Start Point Fine Range: 0–255

This is a fine adjustment of the Loop Start Point.

End-Fine (End Point - End Point Fine)

•End Point Range: 0–

Specifies the point to which the loop will be read.

•End Point Fine Range: 0–255

This is a fine adjustment of the End Point.

Using the Filter to Modify the Brightness ([F3 (TVF)])

The settings for the TVF (Time Variant Filter) allow you to change a Tone’s timbral content by altering its brightness or thickness.

Press [F5 (Global)] to turn Global on and display the "✔" to the left of the function name; the same settings are applied to all Partials used in the Patch being edited. When Global is set to OFF, then only the currently selected Partial (the Partial appearing on the screen) is edited.

Press [F6 (MIDISel)] to display the "✔" to the left of the function name; You can also press a key on a connected MIDI

152