Roland XV-5080 owner manual Editing Partials, Assign Assign Type, Midi Midi Switch, 149

Assign (Assign Type)

Selects the range over which the Split settings are applied. MULTI: The settings affect all Partials.

SINGLE: The settings affect a single selected Partial.

MIDI (MIDI Switch)

Range: OFF/SELECT/SET

Determines whether or not selections and settings are be made with a MIDI keyboard.

OFF: MIDI messages are not received.

SELECT: This setting allows note numbers to be selected from a MIDI keyboard.

* Press [F6 (Set)] to enable the settings.

SET: This sets the value selected with the MIDI keyboard.

Editing Partials

PATCH WG Parameter page ([PATCH] - [F2 (WG)] - [F1 (WG Prm)])

Partial

Name (Partial Name)

You can name a Partial (up to 15 characters).

*Names are given to Partials in the same manner as that described for Patch Names (p. 127).

Coarse Tune (Partial Coarse Tune)

Range: -48– +48

Adjusts the pitch of the Partial’s sound up or down in semitone steps over a range of +/-4 octaves.

Fine Tune (Partial Fine Tune)

Range: -50– +50

Adjusts the pitch of the Partial in one-cent steps (1/100th of a semitone) over a range of half a semitone up or down.

Press [F5 (Global)] to turn Global on and display the “✔” to the left of the function name; the same settings are applied to all Partials used in the Patch being edited. When Global is set to OFF, then only the currently selected Partial (the Partial appearing on the screen) is edited.

Chapter 4 Creating Patches

Press [F6 (MIDISel)], causing "✔" to appear at the left of the function name. The Partials assigned to each key can be selected from the MIDI keyboard or other such controller.

Chap.4

149