U.F (TMT Keyboard Fade Width Upper)

Range: 0–127

Determines what will happen to the Tone’s level when a note that’s higher than the Tone’s specified keyboard range is played. Higher settings result in a more gradual change in volume. If you don’t want the Tone to sound at all when a note above the keyboard range is played, set this parameter to 0.

*When using Multi-partial Patches, this setting page doesn’t appear.

V. Range (Patch Velocity Range)

These parameters can be set only for Four-Tone Patches.

*When using Multi-partial Patches, this setting page doesn’t appear.

PATCH Common TMT Vel Range page ([PATCH] - [F5 (V.Range)])

Control (TMT Velocity Control)

With the XV-5080, you can set the expression range (key range) and the way a Tone is played according to the force with which the key is pressed (velocity) for each Tone individually. These settings are collectively referred to as the TMT (Tone Mix Table).

Velocity-Ctrl (TMT Velocity Control Switch)

Range: OFF/ON/RANDOM

Determines whether Velocity messages from a MIDI keyboard or sequencer will be recognized (ON), or ignored (OFF).

When set to RANDOM, the Patch’s constituent Tones will sound randomly, regardless of any Velocity messages.

Chapter 4 Creating Patches

Matrix-Ctrl (TMT Matrix Control Switch)

Range: OFF/ON

This setting determines whether or not the TMT is controlled by the Matrix Control. When Velo (TMT Velocity Control Switch) is set to OFF, turning this parameter on and off is a simple way to switch between playing all Tones or controlling them with the Matrix Control, making this an effective tool for auditioning Tones.

Tone

Displays the Tone number.

L.F (TMT Velocity Fade Width Lower)

Range: 0–127

Determines what will happen to the Tone’s level when the Tone is played at a velocity lower than its specified velocity range. Higher settings result in a more gradual change in volume. If you don’t want notes played outside the specified velocity range to be heard at all, set this to 0.

Level

1

Lower

Upper

Velocity

 

L.Fade value

U.Fade value

 

V.L (TMT Velocity Range Lower)

Range: 1–127

Specifies the highest limit of playing dynamics (key velocity) which will sound the Tone. Make these settings when you want different Tones to sound in response to notes played at different strengths.

V.U (TMT Velocity Range Upper)

Range: C -1–G9

Specifies the highest limit of playing dynamics (key velocity) which will sound the Tone. Make these settings when you want different Tones to sound in response to notes played at different strengths.

*The Lower value cannot be set to a value greater than Upper value, or vice versa. If you attempt to do this, the two values will change simultaneously.

Chap.4

133

Page 133
Image 133
Roland XV-5080 owner manual Range Patch Velocity Range