Chapter 8 Saving Tones and Other Data You’ve Created

By pressing [F2 (View)], you can specify the category of files to be displayed.

Turn the VALUE dial or press [ ] or [ ] to select the category to be loaded, then press [F5 (Mark)]. Press [F4 (Mk All) if you want to set markers for all files. Press this once more to remove all markers.

The files can also be sorted. Press [F3 (Sort)] to open the window for selecting the sorting preferences. Turn the

VALUE dial or press [ ] or [ ] to select the sort type, then press [F6 (OK)].

Without: Files are displayed in the order in which they have been saved.

Name: Files are sorted by file name, in ascending order.

Size : Files are sorted in ascending order of file size.

Size : Files are sorted in descending order of file size.

8.Press [F6 (Delete)].

The confirmation message “Delete Sure?” appears in the display.

9.When you press [F6 (OK)], the delete is executed.

*To cancel the operation, press [EXIT].

*You cannot delete individual Patches or Performances within a file (.SVD).

Free Area

SIMM

This displays the amount of free space in the SIMM.

Disk

This displays the free disk space remaining on the connected SCSI device.

Marked

This displays the number and size of marked samples being transmitted.

<Copying/Moving Files (Cp/Move)>

1.Press [DISK], lighting the indicator.

2.Press [F1 (Crd&Dsk)].

3.Press [F5 (Tool)].

The Card&Disk Copy Source page appears.

4.Press [F1 (Drive)].

5.Rotate the VALUE dial, or press [ ]/[ ] to select “CARD.”

6.Press [F6 (OK)].

7.Turn the VALUE dial or press [ ] or [ ] to select the files to be copied or moved, then press [F5 (Mark)]. Press [F4 (Mk All) if you want to set markers for all files. Press this once more to remove all markers.

By pressing [F2 (View)], you can specify the category of files to be displayed.

Turn the VALUE dial or press [ ] or [ ] to select the category to be loaded, then press [F5 (Mark)].Press [F4 (Mk All) if you want to set markers for all files. Press this once more to remove all markers.

The files can also be sorted.Press [F3 (Sort)] to open the window for selecting the sorting preferences. Turn the

VALUE dial or press [ ] or [ ] to select the sort type, then press [F6 (OK)].

Without: Files are displayed in the order in which they have been saved.

Name: Files are sorted by file name, in ascending order.

Size : Files are sorted in ascending order of file size.

Size : Files are sorted in descending order of file size.

8.Press [F6 (Select)].

The Card&Disk Copy Destination page appears.

*The amount of space available on the media at the copy/move destination is displayed. This allows you to check whether or not marked files can be copied/moved.

9.After pressing [F1 (Drive)], turn the VALUE dial or press

[ ] or [ ] to select the media you want to be the copy/move destination.

When copying or moving to a folder, press [ ] or [ ] to

select the move destination folder, then press [ ] to close the folder.

10.Press [F6 (OK)].

11.Press [F6 (Copy)] to initiate the copy.

Here, when you press [F5 (Move)], the move is executed.

*To cancel the operation, press [EXIT].

*You cannot copy or move individual Patches or Performances within a file (.SVD).

198

Page 198
Image 198
Roland XV-5080 owner manual Copying/Moving Files Cp/Move, 198