Roland XV-5080 owner manual Step Flanger, Step Rate, Stereo Delay

Chapter 2 Using the XV-5080 Effects

16: STEP FLANGER

The Step Flanger effect is a flanger in which the flanger pitch changes in steps. The speed at which the pitch changes can also be specified in terms of a note-value of a specified tempo.

	Balance D
L in	2-Band	L out
	EQ

Step Flanger Balance W

Feedback

Feedback

Step Flanger Balance W

R in		2-Band	R out
		EQ
	Balance D

Flanger

Rate (LFO Rate)

Adjust the rate of modulation.

Depth (LFO Rate)

Adjust the depth of modulation.

Fbk (Feedback Level) #

Adjust the amount (%) of the flanger sound that is returned (fed back) into the input. Negative (-) settings will invert the phase.

Feedback #

Adjust the amount (%) of the processed sound that is returned (fed back) into the input. Positive (+) settings will return the sound in phase, and negative (-) settings will return the sound in reverse phase.

Phase

Adjust the spatial spread of the sound.

Pre Delay (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

Step Rate

Step Rate #

Adjust the rate (period) of pitch change. This parameter can be set as a note-value of a specified tempo. In this case, specify the value of the desired note.

EQ Gain

Low (LowGain)

Adjust the gain of the low frequency range.

High (High Gain)

Adjust the gain of the high frequency range.

Balance

Balance (Effect Balance)

Adjust the volume balance between the direct sound and the flanger sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the chorus sound will be output.

Output

Level (Output Level)

Adjust the output level.

17: STEREO DELAY

This is a stereo delay.

When Feedback Mode is NORMAL:

Balance D	2-Band
L in		L out
	EQ
Delay	Balance W
Feedback
Feedback
Delay	Balance W
R in	2-Band	R out
	EQ
Balance D
When Feedback Mode is CROSS:
Balance D	2-Band
L in		L out
	EQ
Delay	Balance W
Feedback
Feedback
Delay	Balance W
R in	2-Band	R out
	EQ
Balance D

Delay

Left (Delay Time Left)

Adjust the time from the original sound until when the left delay sound is heard.

Right (Delay Time Right)

Adjust the time from the original sound until when the right delay sound is heard.

HF Damp

Adjust the frequency above which sound fed back to the effect will be cut. If you do not want to cut the high

52