Roland XV-5080 owner manual Organizing a Zip Disk, Renaming a File/Folder Rename, 201

Chapter 8 Saving Tones and Other Data You’ve Created

[F2 (← Prev)]: To move back one character.

[F4 (Insert)]: To insert a space.

[F5 (Delete)]: To delete the character at the cursor position. The Save what from SIMM? window will appear.

WAV + PARAMETERS: All of the XV-5080’s settings are saved. In addition, samples loaded to the SIMM are saved in WAV format.

AIFF + PARAMETERS: All of the XV-5080’s settings are saved. In addition, samples loaded to the SIMM are saved in AIFF format.

PARAMETERS ONLY: All of the XV-5080’s settings other than those for sample wave data loaded to the SIMM are saved.

*When saving with “PARAMETERS ONLY” selected, the wave data itself is not saved. After first performing a save using “WAV + PARAMETERS” or “AIFF + PARAMETERS,” which save the waveforms as well, you can save time during tone editing or other operations on the XV- 5080 by thereafter carrying out saves (if saving to the same media) using the “PARAMETERS ONLY” option.

If you later load data from a CD-ROM or other source, you will need to save the waveforms themselves using the “WAV + PARAMETERS” or “AIFF + PARAMETERS” option.

7.When you are finished making settings, press [F5 (Full)] or [F6 (Quick)].

The save is executed.

[F5 (Full)]: All samples loaded into SIMM will be saved. The saved data will overwrite all samples in the storage device. [F6 (Quick)]: Only the changes relative to the contents of the storage device will be saved. The samples in the folder on the external storage device (e.g., Zip) will be compared (by name and size) with the samples loaded into the SIMM memory of the XV-5080, and only the newly added samples or replaced samples will be saved. If samples not loaded into the SIMM memory are found in the folder on the save destination external device, those samples will be deleted from the storage device.

* To cancel the operation, press [EXIT].

8.Press [DISK] to return to the previous page.

Creating a Folder

You can create folders when saving data to Zip drives or other similar external SCSI devices.

Saving all of the XV-5080's settings using a separate folder for the contents of each sample allows you to efficiently manage Patches and other such data that use samples contained in the SIMM.

Pressing [F2 (New)] takes you to the Create New Folder window.

fig.08-011.e_70

Here, after the name is applied, pressing [F6 (OK)] creates the folder.

For instructions on supplying a name, refer to Step 9 of <Renaming a File/Folder (RENAME)> (p. 201).

Free Area

SIMM

This displays the amount of free space in the SIMM.

Disk

This displays the free disk space remaining on the connected SCSI device.

Organizing a Zip Disk

<Renaming a File/Folder (RENAME)>

This is exactly the same as with memory cards. Refer to “Organizing the Contents of Memory Cards” (p. 197).

<Deleting a File/Folder (Delete)>

This is exactly the same as with memory cards. Refer to “Organizing the Contents of Memory Cards” (p. 197).

<Copying/Moving a File/Folder (Cp/ Move)>

This is exactly the same as with memory cards. Refer to “Organizing the Contents of Memory Cards” (p. 197).

Chap.8

201