Roland XV-5080 owner manual Setting a Patch’s Pitch Octave Steps Octave Shift

Chapter 1 Selecting and Playing a Sound

212), modify the third byte to the appropriate value when

transmitting the above exclusive message.

Setting a Patch’s Pitch in

Octave Steps (Octave Shift)

In Patch mode, you can easily change the pitch of an entire

Patch.

Each time you press [ ]/[ ], the pitch will change in one- octave steps. You can adjust a Patch’s pitch by as much as +/ - 3 octaves.

Selecting How a Patch Will

Play (Polyphonic/

Monophonic)

You can set whether a Patch will play multiple notes at the same time (Polyphonic) — for example, when you play a chord or legato line — or whether only the last-played note will be heard (Monophonic).

1.Select the Patch you wish to use. (p. 19)

2.Press [F1 (Common)].

3.Press [F2 (Control)].

4.Press [ ]/[ ]/[ ]/[ ] to move the cursor to “Mono/Poly.”

5.Turn the VALUE dial, or press [INC]/[DEC] to select the desired value.

6.After making the setting, press [EXIT].

Chap.1

23