Roland XV-5080 owner manual 288, Data Transmission

MIDI Implementation

7EH	ID number (Universal Non-realtime Message)
dev	Device ID (dev: 00H - 1FH (1 - 32), the initial value is 10H (17).)
7CH	ID number (Wait)
ppH	Packet number
F7H	EOX (End Of Exclusive)

●Data Transmission

This instrument can use exclusive messages to exchange many varieties of internal settings with other devices.

he model ID of the exclusive messages used by this instrument is 00H 10H.

❍Data Request 1RQ1 (11H)

This message requests the other device to transmit data. The address and size indicate the type and amount of data that is requested.

When a Data Request message is received, if the device is in a state in which it is able to transmit data, and if the address and size are appropriate, the requested data is transmitted as a Data Set 1 (DT1) message. If the conditions are not met, nothing is transmitted.

Status	Data Byte	Status
F0H	41H, dev, 00H, 10H, 11H, aaH, bbH, ccH, ddH, ssH,	F7H
	ttH, uuH, vvH, sum
Byte	Remarks
F0H	Exclusive status
41H	ID number (Roland)
dev	device ID (dev: 10H - 1FH, 7FH)
00H	model ID #1 (XV-5080)
10H	model ID #2 (XV-5080)
11H	commandID (RQ1)
aaH	address MSB
bbH	address
ccH	address
ddH	address LSB
ssH	size MSB
ttH	size
uuH	size
vvH	size LSB
sum	checksum
F7H	EOX (End Of Exclusive)

*The size of data that can be transmitted at one time is fixed for each type of data. And data requests must be made with a fixed starting address and size. Refer to the address and size given in "Parameter Address Map (p. 290)".

*For the checksum, refer to Example of an Exclusive message and calculating a checksum (p. 303).

*Not received when the Receive Exclusive parameter (SYSTEM/COMMON) is OFF.

❍Data set 1DT1 (12H)

Status	Data byte	Status
F0H	41H, dev, 00H, 10H, 12H, aaH, bbH, ccH, ddH,	F7H
	eeH, ... ffH, sum
Byte	Explanation
F0H	Exclusive status
41H	ID number (Roland)
dev	Device ID (dev: 00H - 1FH, Initial value is 10H)
00H	Model ID #1 (XV-5080)
10H	Model ID #2 (XV-5080)
12H	Command ID (DT1)
aaH	Address MSB: upper byte of the starting address of the data to be sent
bbH	Address: upper middle byte of the starting address of the data to be
sent
ccH	Address: lower middle byte of the starting address of the data to be
sent
ddH	Address LSB: lower byte of the starting address of the data to be sent.
eeH	Data: the actual data to be sent. Multiple bytes of data are transmitted
in order starting from the address.
:	:
ffH	Data
sum	Checksum
F7H	EOX (End Of Exclusive)

*The amount of data that can be transmitted at one time depends on the type of data, and data will be transmitted from the specified starting address and size. Refer to the Address and Size given in Section 3, "Parameter address map.

*Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each packet will be sent at an interval of about 20 ms.

*Not received when the Receive Exclusive parameter (SYSTEM/COMMON) is OFF.

Status	Data byte							Status
F0H	41H, dev, 42H, 12H, aaH, bbH, ccH, ddH, ... eeH, sum							F7H
Byte	Explanation
F0H	Exclusive status
41H	ID number (Roland)
dev	Device ID (dev: 10H)
42H	Model ID	(GS)
12H	Command ID	(DT1)
aaH	Address MSB:	upper	byte	of	the	starting	address		of	the
transmitted data
bbH	Address:	middle	byte	of	the	starting		address	of	the
transmitted data
ccH	Address LSB:	lower	byte	of	the	starting	address		of	the
transmitted data
ddH	Data:	the actual data to be transmitted. Multiple bytes
of data are transmitted starting from the address.
:	:
eeH	Data
sum	Checksum
F7H	EOX	(End Of Exclusive)

*The amount of data that can be transmitted at one time depends on the type of data, and data will be transmitted from the specified starting address and size. Refer to the Address and Size given in Section 3, "Parameter address map.

*Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each packet will be sent at an interval of about 20 ms.

*Regarding the checksum, please refer to p. 303 .

*Not received when the Receive Exclusive parameter (SYSTEM/COMMON) is OFF.

2. Data transmission	(sound source
section)

■Channel Voice Messages

When execute the GM Data Transfer, the following Program Change and Control Change

will transmit.

●Control Change

❍Bank Select (Controller number 0, 32)

Status	2nd byte	3rd byte
BnH	00H	mmH
BnH	20H	llH

n = MIDI channel number:0H - FH (Ch.1 - 16)

mm, ll = Bank nunber:00 00H - 7F 7FH (bank.1 - bank.16384)

❍Portamento Time (Controller number 5)

Status	2nd byte	3rd byte
BnH	05H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16) vv = Portamento Time:00H - 7FH (0 - 127)

❍Data Entry (Controller number 6, 38)

Status	2nd byte	3rd byte
BnH	06H	mmH
BnH	26H	llH

n = MIDI channel number: 0H - FH (Ch.1 - 16)

mm, ll = the value of the parameter specified by RPN/NRPN mm = MSB, ll = LSB

❍Volume (Controller number 7)

Status	2nd byte	3rd byte
BnH	07H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Volume:	00H - 7FH (0 - 127)

288