Roland XV-5080 owner manual Midi Implementation, 283

*In Performance mode the Part pan parameter (PERFORM/PART) will change.

❍Expression (Controller number 11)

Status	2nd byte	3rd byte
BnH	0BH	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Expression:	00H - 7FH (0 - 127)

*Not received when Tone Receive Expression parameter (PATCH/TONE or RHYTHM/ TONE) is OFF.

*Not received in Performance mode when Receive Expression parameter (PERFORM/ MIDI) is OFF.

❍Hold 1 (Controller number 64)

Status	2nd byte	3rd byte
BnH	40H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

*Not received when Tone Receive Hold-1 parameter (PATCH/TONE or RHYTHM/ TONE) is OFF.

*Not received in Performance mode when Receive Hold-1 parameter (PERFORM/MIDI) is OFF.

❍Portamento (Controller number 65)

Status	2nd byte	3rd byte
BnH	41H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

*In Performance mode the Part Portamento Switch parameter (PERFORM/PART) will change.

❍Sostenuto (Controller number 66)

Status	2nd byte	3rd byte
BnH	42H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

❍Soft (Controller number 67)

Status	2nd byte	3rd byte
BnH	43H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

❍Legato Foot Switch (Controller number 68)

Status	2nd byte	3rd byte
BnH	44H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

*In Performance mode the Part Legato Switch parameter (PERFORM/PART) will change.

❍Hold-2 (Controller number 69)

Status	2nd byte	3rd byte
BnH	45H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv= Control value: 00H - 7FH (0 - 127)

* A hold movement isn't done.

❍Resonance (Controller number 71)

Status	2nd byte	3rd byte
BnH	47H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv= Resonance value (relative change):00H - 7FH (-64 - 0 - +63),

*In Performance mode the Part Resonance Offset parameter (PERFORM/PART) will change.

❍Release Time (Controller number 72)

Status	2nd byte	3rd byte
BnH	48H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Release Time value (relative change):00H - 7FH (-64 - 0 - +63),

MIDI Implementation

*In Performance mode the Part Release Time Offset parameter (PERFORM/PART) will change.

❍Attack time (Controller number 73)

Status	2nd byte	3rd byte
BnH	49H	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Attack time value (relative change):00H - 7FH (-64 - 0 - +63),

*In Performance mode the Part Attack Time Offset parameter (PERFORM/PART) will change.

❍Cutoff (Controller number 74)

Status	2nd byte	3rd byte
BnH	4AH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv = Cutoff value (relative change):00H - 7FH (-64 - 0 - +63)

*In Performance mode the Part Cutoff Offset parameter (PERFORM/PART) will change.

❍Decay Time (Controller number 75)

Status	2nd byte	3rd byte
BnH	4BH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv= Decay Time value (relative change):00H - 7FH (-64 - 0 - +63)

* The decay time will change in GM mode.

❍Vibrato Rate (Controller number 76)

Status	2nd byte	3rd byte
BnH	4CH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv= Vibrato Rate value (relative change):00H - 7FH (-64 - 0 - +63)

* The vibrato rate will change in GM mode.

❍Vibrato Depth (Controller number 77)

Status	2nd byte	3rd byte
BnH	4DH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv= Vibrato Depth Value (relative change):00H - 7FH (-64 - 0 - +63)

* The vibrato depth will change in GM mode.

❍Vibrato Delay (Controller number 78)

Status	2nd byte	3rd byte
BnH	4EH	vvH

n = MIDI channel number:0H - FH (Ch.1 - 16)

vv= Vibrato Delay value (relative change):00H - 7FH (-64 - 0 - +63)

* The vibrato delay will change in GM mode.

❍General Purpose Controller 5 (Controller number 80)

Status	2nd byte	3rd byte
BnH	50H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127)

*The Tone Level parameter (PATCH/TONE) of Tone 1 will change.

❍General Purpose Controller 6 (Controller number 81)

Status	2nd byte	3rd byte
BnH	51H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127)

*The Tone Level parameter (PATCH/TONE) of Tone 2 will change.

❍General Purpose Controller 7 (Controller number 82)

Status	2nd byte	3rd byte
BnH	52H	vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value:	00H - 7FH (0 - 127)

*The Tone Level parameter (PATCH/TONE) of Tone 3 will change.

Appendices

283