Roland XV-5080 Rhythm Common page Rhythm F1 Common, 115, Output Assign Rhythm Set Output Assign

MFX Chorus Send Level

Range: 0–127

Determines the level of the post-Multi-effects processor signal sent to Chorus. Its final output destination is determined by the Chorus output setting.

MFX Reverb Send Level

Range: 0–127

Determines the level of the post-Multi-effects processor signal sent to Reverb. Its final output destination is determined by the Reverb output setting.

Chorus Output Select

Specifies how the signal routed through Chorus will be output.

Available Settings:

MAIN: The Chorus output is sent only to the OUTPUT jacks.

REV: The Chorus output is sent only to the Reverb.

M+R: The Chorus output is sent to the OUTPUT jacks and to the Reverb.

Chorus Level

Range: 0–127

Determines the Chorus output level.

Reverb Level

Range: 0–127

Determines the Reverb output level.

MFX Output Assign

Range: A–D

Selects the pair of OUTPUT jacks to which the Multi-effects stereo output is routed.

*As the Multi-effects are in stereo, settings for the INDIVIDUAL OUTPUT jacks are unavailable.

Chorus Output Assign

Range: A–D

Selects the pair of OUTPUT jacks to which the Chorus unit’s stereo output is routed when Chorus Output Select is set to “MAIN” or “M+R.” The output destination setting for the signal sent to Reverb is determined according to the Reverb settings.

*As the internal effects processors are in stereo, settings for the INDIVIDUAL OUTPUT jacks are unavailable.

Reverb Output Assign

Range: A–D

Selects the OUTPUT jacks to which the Reverb unit’s stereo output is routed.

Chapter 3 Selecting Output Jacks

*As the internal effects devices are in stereo, you cannot make the settings for the INDIVIDUAL OUTPUT jacks.

RHYTHM Common page ([RHYTHM] - [F1 (Common)])

Common	Chap.
Level (Rhythm Level)
Range: 0–127	3
Sets the volume of the Rhythm Set.

*You can specify the level for each Rhythm Tone using the Tone Level parameter (p. 177).

Output Assign (Rhythm Set Output Assign)

Available Settings:

MFX: The Tone is sent into the Multi-effects. Its output destination is determined by the Multi-effects output settings.

OUTPUT A–D:The Rhythm Tone is sent to the selected OUTPUT A–D jacks.

INDIV 1–8:The Tone is sent to the INDIVIDUAL OUTPUT jacks 1–8.

TONE: Outputs according to the settings for each Rhythm

Tone.

115