Roland XV-5080 Signal Rhythm Tone Flow, Rhythm Effects General page Rhythm F6 Effects F1 General

Chapter 3 Selecting Output Jacks

Rhythm Set Mode Settings

Signal (RHYTHM TONE) Flow

RHYTHM

TONE

Output Assign

A

B

C

D

M-FX

Output Assign

M-FX

CHO

Chorus

Output Assign

REV

Reverb

Output Assign

OUTPUT A

OUTPUT B

OUTPUT C

OUTPUT D

Parameters

The parameters related to Patch output settings are shown below.

RHYTHM Effects General page ([RHYTHM] - [F6 (Effects)] - [F1 (General)])

These parameters set the output destination and level for the currently selected Rhythm Set Tone, and allow you to set its send levels to the Chorus and Reverb.

Rhythm Tone Output Assign

Available Settings:

MFX: The Tone is sent to the Multi-effects. Its output destination is determined by the Multi-effects output settings.

A–D:The Tone is sent to one of the four output-jack stereo pairs, OUTPUTS A–D.

1–8:The Tone is sent to the INDIVIDUAL OUTPUT jacks 1–

8.

Rhythm Tone Dry Send Level

Range: 0–127

Sets the level of the signal to be sent to the OUTPUT jacks, which is determined by Rhythm Tone Output Assign.

Rhythm Tone Chorus Send Level

Range: 0–127

Sets how much of the Tone is sent to the Chorus. Its final output destination is determined by the Chorus output setting.

Rhythm Tone Reverb Send Level

Range: 0–127

Sets how much of the Tone is sent to the Reverb. Its final output destination is determined by the Reverb output setting.

MFX Dry Send Level

Range: 0–127

Determines the level of the Multi-effects processor’s output to the OUTPUT jacks.

114