Chapter 3 Selecting Output Jacks

Settings in General MIDI Mode

Signal (PART) Flow

Output Assign

 

A

 

B

Part

C

 

 

D

 

Out (GM CHORUS)

 

CHO

 

Rev (GM CHORUS)

 

REV

OUTPUT A

OUTPUT B

OUTPUT C

OUTPUT D

Chap.3

Out (GM REVERB)

Parameters

The parameters related to Part output settings are shown

below.

GM Effects General page ([GM] - [F6 (Effects)] - [F1 (General)])

Sets the output destination and level for the selected Part, as well as its send level with respect to the Chorus and Reverb.

Part Output Assign

Sets the output destination for each Part.

Available Settings:

A–D:The Part is sent to the selected pair of OUTPUT A–D

jacks.

Part Dry Send Level

Range: 0–127

Sets the level of the signal to be sent to the OUTPUT jacks, which is determined by Part Output Assign.

Part Chorus Send Level

Range: 0–127

Sets how much of the Tone is sent to the Chorus. Its final output destination is determined by the Chorus output setting.

Part Reverb Send Level

Range: 0–127

Sets how much of the Tone is sent to the Reverb. Its final output destination is determined by the Reverb output setting.

Chorus Output Assign

Range: A–D

Selects the OUTPUT jacks to which the Chorus unit’s stereo output is routed.

*As the internal effects processors are in stereo, settings for the INDIVIDUAL OUTPUT jacks are unavailable.

117

Page 117
Image 117
Roland XV-5080 owner manual GM Effects General page GM F6 Effects F1 General, 117