Chapter 10 Examples of Applications Using the XV-5080

Turning Effects On/Off

1.Press [EFFECTS ON/OFF].

2.Use [ ] or [ ] to select the effects device to be turned on or off.

3.Pressing [INC] turns it on and pressing [DEC] turns it off.

EQ

An equalizer lets you boost or cut specified frequency ranges of a sound to adjust the tone.

*Although you can add equalization to each of the XV-5080’s output jacks, this operation turns the EQ for all of the outputs on and off simultaneously.

Chorus

Chorus is an effect that add fatness and breadth to the sound.

Reverb

Reverb is an effect that adds reverberation resembling that created when sounds are played in a hall.

Modifying GM Mode Settings

GM mode also offers parameters that you can modify for each Part. You can modify settings like effects, pan and level to customize a GM score playback to your preference. When GM mode is initialized (p. 229), all these settings will be lost.

1.Press [GM] to enter GM mode.

2.Press [F2]–[F5] to choose the page group you want to set.

3.Press [ ]/[ ]/[ ]/[ ] to move the cursor to the parameter you want to set.

If you have selected a parameter display that can be set independently for each Part, the number of the Part selected for editing will be shown in the display. To select a different Part, use [1/17]–[16/32] to select a Part.

4.Use the VALUE dial or [INC] / [DEC] to modify the value.

*If you make a mistake when setting a parameter’s value, or you don’t like the change you have made, just press [UNDO] to restore the parameter to its original value.

5.If you wish to move to another page group, use [F2]–[F5] to choose a group.

*You can also move to another display group by holding down

[SHIFT] and using [ ] or [ ].

6.Repeat steps 2–5 to complete a GM mode settings.

7.When you finish making settings, press [EXIT] to return to the GM PLAY page.

*You can also use the Palette display in the same manner when you edit in Performance mode (p. 135).

Settings for Playing Sounds ([F2

(Control)])

Modify (Part Modify)

You can determine how a Part will pay a sound by setting it to modify the sound’s programmed cutoff frequency, Resonance, and TVF and TVA Envelope attack and release time settings.

Cutoff Offset (Part Cutoff Offset)

Range: -64– +63

Sets ratio by which the relative change in the TVF cutoff frequency value for the tone selected for the part is determined.

Resonance Offset (Part Resonance Offset)

Range: -64– +63

Sets ratio by which the relative change in the TVF Resonance value for the tone selected for the part is determined.

Attack Time Offset (Part Attack Time Offset)

Range: -64– +63

Sets ratio by which the relative change in the TVF/TVA envelope attack time value for the tone selected for the part is determined.

Release Offset (Part Release Time Offset)

Range: -64– +63

Sets ratio by which the relative change in the TVF/TVA envelope release time value for the tone selected for the part is determined.

Chap.10

225

Page 225
Image 225
Roland XV-5080 owner manual Turning Effects On/Off, Modifying GM Mode Settings, Settings for Playing Sounds F2, 225