Fast (Low Frequency Fast Rate)

Adjusts the speed of the low-range rotor for the fast-speed

setting.

Accel (Low Frequency Acceleration)

Adjusts the time over which the rotation speed of the low- range rotor will change from slow-speed to fast-speed (or fast-speed to slow-speed) rotation. Lower values will require longer times.

Level (Low Frequency Level)

Adjusts the volume of the low-range rotor.

Tweeter

Slow (High Frequency Slow Rate)

Adjusts the speed of the high-range rotor for the slow-speed

setting.

Fast (High Frequency Fast Rate)

Adjusts the speed of the high-range rotor for the fast-speed

setting.

Accel (High Frequency Acceleration)

Adjusts the time over which the rotation speed of the high- range rotor will change from slow-speed to fast-speed (or fast-speed to slow-speed) rotation. Lower values will require longer times.

Level (RT High Frequency Level)

Adjusts the volume of the high-range rotor.

Output

Level (Output Level)

Adjusts the output level.

Pan (Output Pan) #

Adjusts the stereo location of the output sound.

Chapter 2 Using the XV-5080 Effects

73: KEYBOARD MULTI

Keyboard Multi provides Ring Modulator (RM), Equalizer (EQ), Pitch Shifter (PS), Phaser (PH) and Delay (Dly) effects connected in series.

Ring Modulator is an effect that applies amplitude modulation (AM) to the input signal, producing bell-like sounds.

L in

Ring Mod

3-Band EQ

 

 

 

 

Pitch

 

 

 

Shifter

R in

Ring Mod

3-Band EQ

Feedback

 

 

 

 

L out

 

 

 

Feedback

 

Phaser

Delay

 

 

Mix

 

 

Resonance

 

R out

Sequence

Ring Mod (Ring Modurator Switch)

Turns the Ring Modulator on/off.

3 Band EQ Sw (3 Band EQ Switch)

Turns the equalizer on/off.

Pch Shift (Pitch Shifter Switch)

Turns the Pitch Shifter on/off.

Phaser (Phaser Switch)

Turns the Phaser on/off.

Delay (Delay Switch)

Turns the delay on/off.

*After turning the VALUE dial to select the effect, you can press [F1] or [F2] to rearrange the order in which effects are connected.

Ring Modulator

Freq (RM Frequency) #

Sets the frequency at which modulation will be applied.

Balance (RM Balance) #

Adjusts the balance between the direct and the ring modulated sound.

Chap.2

87

Page 87
Image 87
Roland XV-5080 owner manual Keyboard Multi