Roland XV-5080 owner manual Gated Reverb

Chapter 2 Using the XV-5080 Effects

24: REVERB

The Reverb effect adds reverberation to the sound,

simulating an acoustic space.

L in	2-Band	L out
	EQ
Balance D
	Balance W
Reverb
	Balance W
R in	2-Band	R out
	EQ
Balance D

Reverb

Type (Reverb Type)

Select the type of Reverb effect.

ROOM1: dense reverb with short decay

ROOM2: sparse reverb with short decay

STAGE1: reverb with greater late reverberation

STAGE2: reverb with strong early reflections

HALL1: reverb with clear reverberance

HALL2: reverb with rich reverberance

Pre Delay (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the reverb sound is heard.

Time (Reverb Time) #

Adjust the time length of reverberation.

HF Damp

Adjust the frequency above which the reverberant sound will be cut. As the frequency is set lower, more of the high frequencies will be cut, resulting in a softer and more muted reverberance. If you do not want the high frequencies to be cut, set this parameter to BYPASS.

EQ Gain

Low (Low Gain)

Adjust the gain of the low frequency range.

High (High Gain)

Adjust the gain of the high frequency range.

Balance

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the reverb sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the reverb sound will be output.

Output

Level (Output Level)

Adjust the output level.

25: GATED REVERB

Gate Reverb is a special type of reverb in which the

reverberant sound is cut off before its natural length.

L in	2-Band	L out
	EQ
Balance D
	Balance W
Gate Reverb
	Balance W
R in	2-Band	R out
	EQ
Balance D

Reverb

Type (Gate Reverb Type)

Select the type of reverb.

NORMAL: conventional gate reverb

REVERSE: backwards reverb

SWEEP1: the reverberant sound moves from right to left

SWEEP2: the reverberant sound moves from left to right

Pre Delay (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the reverb sound is heard.

Gate Time

Adjust the time from when the reverb is heard until when it disappears.

EQ Gain

Low (Low Gain)

Adjust the gain of the low frequency range.

High (High Gain)

Adjust the gain of the high frequency range.

Balance

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the reverb sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the reverb sound will be output.

58