Select PLACE WPT AT VESSEL.
A new waypoint is placed at the vessel’s current position.

Chapter 3: Operation

3-3

 

 

PLACE

WAYPOINT

MOVE CURSOR, "ENTER"TO PLACE

WAYPOINT, "CLEAR" TO QUIT

2.Place the cursor in the required position on the chart and press ENTER to place the waypoint. The waypoint is added to the waypoint list and named using the next available number.

The waypoint functions remain displayed so that you can place further waypoints.

If required, use EDIT WAYPOINT to name the waypoint as described in Editing Waypoints below.

3.When finished placing waypoints, press CLEAR.

To place a waypoint at the vessel’s position:

1.

To place a waypoint using the Waypoint List:

1. Select WAYPOINT LIST . The Waypoint List and associated functions are displayed:

2.Select MAKE NEW WAYPOINT.

The waypoint is placed at the current vessel position or, if a GPS fix is not available, the cursor position. The new waypoint is added to the Waypoint List and named with the next available number.

To return to chart mode, press CLEAR twice.

Page 34
Image 34
Raymarine 420D manual Operation