RayChart 420/420D Chartplotter | |
|
|
Going to an individual target
Rather than following a route, you can go directly to a selected target. This can be an existing waypoint, a port or the current cursor position.
Go to a waypoint
To navigate directly to an existing waypoint: ‰1. From the normal chart display either:
a) Use the trackpad to position the cursor over the required waypoint until the waypoint options function is displayed:
...then press ENTER to display the waypoint functions:
or b) press the GOTO key to display the waypoint options and select GOTO WAYPOINT; the waypoint list appears. Use the cursor to select the required waypoint:
128 nm | CSR | 48°30.367'N | BRG | 231°T |
POS | 1°35.636'W | RNG | 40.91nm |
EXETER
TOPSHAM
TEIGNMOUTH WAYPOINT LIST
EXMOUTH
SYMBOL NAME
ENPORT | TORQUAYWPT 001 PORTLAND |
|
PLYMOUTH | DARTMOUTH | HARBOUR | |
|
| WPT 002 |
|
SALCOMBE | WPT 003 |
| |
|
| WPT 004 CAP DE | |
|
| WPT 005 | LA HAGUE |
POSITION | 50°21.966'N | ||
|
| ALDERNEY | |
|
| 001°20.368'W | |
|
| GUERNSEY | |
BRG 186° T | RNG 21.0 | nm |
DATE 13/10/99 | JERSEY | |
TIME | 15:30 | |
ISLE O
PORTB
GOTO
WAYPOINT
TRACKPAD SELECTS WPT, "ENTER" STARTS GOTO, "CLEAR" TO QUIT
D4690_1
Alternatively, you can select the waypoint from the waypoint list as described in section 3.2
2.Select GOTO WAYPOINT.
A dotted line is drawn between the vessel’s current position and the selected waypoint and navigation to the selected waypoint begins.
