COG 230 T SOG 6.8 Kts, Navigation data | Raymarine 420D manual

3-24	RayChart 420/420D Chartplotter

If no GOTO or follow is in progress, the steering instruction is NO TARGET, no steering arrows are shown, but the rhumb line indicator is shown.

The graphical XTE indication places arrows either side of the rhumb line indicator and pointing towards it, dependent on the value of XTE. The first arrow is shown when the XTE reaches 0.01nm, the second at .05nm and subsequently at 0.1nm intervals .

Note: The steering instruction and graphical XTE indication are repeated on all text-only displays.

Navigation data

The Navigation Data display comprises text data occupying the whole screen:

POSITION

50°45 .000 N

001°06 .000 W (c)

COG 230° T

SOG 6.8 Kts

WAYPOINT			001

BRG	234° T		GPS	FIX
RNG	2.4	nm	TIME	14:32 12/12/99

STEER STARBOARD

D4703_1

Textual data provides Position, SOG, COG, Bearing and Range to waypoint, Time, Fix status and the XTE indicator. Any unavailable data is replaced by dashes, one per character. When there is no GPS fix but there is a value for the last fix, this is shown instead; POSITION is replaced with LAST POSITION.

The (c) indicator only appears when the position has been user calibrated.

The Fix indicator shows the GPS Fix status and indicates either FIX OK or NO FIX. In the case of a differential fix, D-FIX is displayed.

Note: Graphical XTE indicator is as per Waypoint data screen, see above.

Image 55

Raymarine 420D manual COG 230 T SOG 6.8 Kts, Navigation data

Contents

Distributed by Raychart 420/ 420D Chartplotter Page Safety Notices RayChart 420 and 420D Chartplotter Owner’s Handbook United States Preface WarrantyEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Introduction OverviewHow this Handbook is organised General Chartplotter displayDisplay functions Display options Operating controls 128 nm Trackpad and cursor Function bar Dedicated keys Database lists Pop-up menus Conventions used Getting startedSimulator Switching on/off Chart simulator Controlling the display Selecting the display mode Time 1234 Date 26/01/99 Using Find Ship Moving around the chart Status Bar Chart range Changing the chart scale 128 nm Using Navionics Nav-Chart cards Inserting a Nav-Chart card Displaying the chart data Removing a Nav-Chart cardDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Introduction SafetyOperation Working with waypoints Placing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Moving a waypoint Erasing a waypoint Working with routes Creating a new route Saving the Current Route Retrieving a route from the database Clearing the current route from the screen Erasing or renaming a route Displaying route leg and waypoint informationEditing a route To add a waypoint to the end of a route Inserting/deleting waypoints in a route Following routes and going to target points Reverse a route Follow a route Alter a route Target point arrivalJoin a route Advance to a waypoint Restart Cross Track Error XTE Go to a waypoint Going to an individual target Go to a port Go to cursor Stop follow or stop goto Changing the display mode CDI display BDI display Waypoint data BRG 234 T RNG 12.4 nm Navigation data COG 230 T SOG 6.8 Kts Time/Date Data Time Date 26/01/99 Displayed waypoints Transferring waypoints and routesManaging database lists WPT/ROUTE Transfer Using tracks Setting Setting up a track Clearing the current track Man Overboard MOBSmartRoute‰ Range key operates normally to change chart scale Alarms System set up parameters Setting up the chartplotter Menu Options Factory New Default Setting Variation Bearing modeKey beep Units Simulated COG Time offsetLanguage Simulated SOG Chart set up parameters Parameter Options Factory New Default Setting Show waypoints Plotter modeWaypoint symbol Orientation Screen amplifier Anchor alarmXTE alarm Chart text Depth contours 20M Chart boundariesDepth contours 5M Depth contours 10M GPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter EMC Installation Guidelines Installation Suppression ferrites Unpacking and inspecting the componentsConnections to other equipment Selecting the best location LocationItems Missing? Registering this Product 122 mm 4.8 Panel mounting Connecting to other equipmentMounting the chartplotter Trunnion yoke mounting D47221 GPS connector Chartplotter connectorsCabling POWER/NMEA connector Function Color System Check and Initial Switch On System Check Initial Switch On Checking the Chartplotter Operation RayChart 420/420D Chartplotter Routine checks Maintenance & fault findingMaintenance Servicing and Safety Two types of reset are available for the Chartplotter Resetting the system Fault finding Problem solving Worldwide support How to contact Raytheon Marine USFor accessories and parts For product repair and service How to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Y2K Appendix a Specification RayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 COG Appendix C List of abbreviations RayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Warranty Limitations Limited Warranty Certificate United States of America Factory Service Centers