Bearing mode, Key beep, Units, Variation | Raymarine 420D guide

Chapter 4: Setting Up the Chartplotter				4-3


	Menu	Options	Factory	New
			Default	Setting

	DATE FORMAT	DD/MM/YY	DD/MM/YY
		MM/DD/YY

TIME OFFSET		UTC or local offset value	UTC
		up to ±13 hours in 1-hr steps

	LANGUAGE	MULTI-LANGUAGE	ENGLISH

	SIMULATOR	OFF/ON	OFF

	SIMULATED SOG	00 Kt to 99 Kt in 1 Kt steps	00 Kt

	SIMULATED COG	000° to 359° in 1° steps	000°

Bearing mode

The mode (MAGnetic or TRUE) of all the bearing and heading data displayed. This is indicated by M or T in the BRG or COG field of the Chart status bar.

Key beep

This setting controls audible feedback resulting from operation of the keys.

Note: Alarms remain active.

Units

You can set the units for distance, speed and depth . The units you set will be used to display all data. However, the distance units do not affect the chart scale, which is always in nautical miles.

Variation

The variation value is the difference between True and Magnetic direction data for heading or bearing values. The Magnetic value is derived from True by applying the user selected value of variation.

The variation is varied in 1° steps to 30° East or West. Press trackpad right to move the value eastward, or left to move it westward. The selected value is retained when the unit is switched off. The Default value is zero.

Date format

Set your preferred date format (DD/MM/YY or MM/DD/YY). The selected setting is retained when the unit switched off. The Default is DD/MM/YY.

Image 64

Raymarine 420D manual Bearing mode, Key beep, Units, Variation, Date format

Contents

Distributed by Raychart 420/ 420D Chartplotter Page RayChart 420 and 420D Chartplotter Owner’s Handbook Safety Notices United States Preface WarrantyEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Introduction OverviewHow this Handbook is organised General Chartplotter displayDisplay functions Operating controls Display options Trackpad and cursor 128 nm Dedicated keys Function bar Pop-up menus Database lists Conventions used Getting startedSimulator Switching on/off Chart simulator Selecting the display mode Controlling the display Time 1234 Date 26/01/99 Moving around the chart Using Find Ship Changing the chart scale Status Bar Chart range Using Navionics Nav-Chart cards 128 nm Inserting a Nav-Chart card Displaying the chart data Removing a Nav-Chart cardDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Safety OperationWorking with waypoints Introduction Placing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Erasing a waypoint Moving a waypoint Working with routes Creating a new route Saving the Current Route Clearing the current route from the screen Retrieving a route from the database Erasing or renaming a route Displaying route leg and waypoint informationEditing a route Inserting/deleting waypoints in a route To add a waypoint to the end of a route Following routes and going to target points Follow a route Reverse a route Alter a route Target point arrivalJoin a route Restart Cross Track Error XTE Advance to a waypoint Going to an individual target Go to a waypoint Go to cursor Go to a port Changing the display mode Stop follow or stop goto CDI display BDI display BRG 234 T RNG 12.4 nm Waypoint data COG 230 T SOG 6.8 Kts Navigation data Time Date 26/01/99 Time/Date Data Displayed waypoints Transferring waypoints and routesManaging database lists Using tracks WPT/ROUTE Transfer Setting up a track Setting Clearing the current track Man Overboard MOBSmartRoute‰ Alarms Range key operates normally to change chart scale Setting up the chartplotter System set up parameters Menu Options Factory New Default Setting Bearing mode Key beepUnits Variation Time offset LanguageSimulated SOG Simulated COG Chart set up parameters Parameter Options Factory New Default Setting Plotter mode Waypoint symbolOrientation Show waypoints Anchor alarm XTE alarmChart text Screen amplifier Chart boundaries Depth contours 5MDepth contours 10M Depth contours 20M GPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter Installation EMC Installation Guidelines Suppression ferrites Unpacking and inspecting the componentsConnections to other equipment Location Items Missing?Registering this Product Selecting the best location 122 mm 4.8 Connecting to other equipment Mounting the chartplotterTrunnion yoke mounting Panel mounting D47221 GPS connector Chartplotter connectorsCabling POWER/NMEA connector System Check and Initial Switch On Function Color Initial Switch On System Check Checking the Chartplotter Operation RayChart 420/420D Chartplotter Maintenance & fault finding MaintenanceServicing and Safety Routine checks Resetting the system Two types of reset are available for the Chartplotter Problem solving Fault finding How to contact Raytheon Marine US For accessories and partsFor product repair and service Worldwide support How to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Appendix a Specification Y2K RayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 Appendix C List of abbreviations COG RayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Limited Warranty Certificate Warranty Limitations Factory Service Centers United States of America