Go to cursor, Go to a port | Raymarine 420D manual

Chapter 3: Operation	3-19

Go to cursor

Note: If navigation is currently in progress or if the cursor is homed (Find Ship) it is not possible to go to cursor.

To navigate directly to the current cursor position:

‰	1.		Press the GOTO key and select GOTO CURSOR. The GOTO CURSOR
			function now has help text appended to it:

			GOTO	MOVE CURSOR, "ENTER" TO START
			CURSOR	GOTO CURSOR, "CLEAR" TO QUIT
				D4691_1
	2.		Use the trackpad to position the cursor as required.
	3.		Press ENTER to start the GoTo, or CLEAR to cancel the operation.
			A temporary waypoint is placed at the cursor position and navigation

proceeds towards it. The waypoint is shown as a square with a dot in the centre and is connected to the vessel’s starting position with a dotted line. On arrival, the arrival alarm is sounded and the arrival pop-up box is displayed.

Note: The temporary waypoint is not added to the waypoint list; when the GoTo is complete, or is stopped, the temporary waypoint is erased.

Go to a port

You can navigate directly to the nearest port or to a selected port or facility.

‰

‰

To navigate directly to selected port:

1.Press the GOTO key and select GOTO PORT to display the Port List.

2.Use trackpad up/down to select the required port and press ENTER to start the GoTo, or CLEAR to cancel the operation.

A dotted line is drawn between the current vessel position and the target waypoint which is placed at the port. The line remains fixed on the screen as the vessel moves.

Bearing, Range and Cross Track Error are calculated for the target waypoint in the same manner as for GOTO CURSOR.

On arrival, the arrival alarm is sounded and the arrival pop-up box is displayed.

To navigate directly to the nearest port or facility:

1.Press the GOTO key and select GOTO NEAREST to display the list.

2.Use trackpad up/down to select the required facility and press ENTER to start the GoTo, or CLEAR to cancel the operation.

The list shows the eight nearest places where the selected facility exists, in order of distance. The bearing and range (in selected units) for each one is shown.

Image 50

Raymarine 420D manual Go to cursor, Go to a port

Contents

Distributed by Raychart 420/ 420D Chartplotter Page RayChart 420 and 420D Chartplotter Owner’s Handbook Safety Notices United States EMC Conformance WarrantyPreface RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D How this Handbook is organised OverviewIntroduction Display functions Chartplotter displayGeneral Operating controls Display options Trackpad and cursor 128 nm Dedicated keys Function bar Pop-up menus Database lists Simulator Getting startedConventions used Switching on/off Chart simulator Selecting the display mode Controlling the display Time 1234 Date 26/01/99 Moving around the chart Using Find Ship Changing the chart scale Status Bar Chart range Using Navionics Nav-Chart cards 128 nm Inserting a Nav-Chart card Displaying chart information Removing a Nav-Chart cardDisplaying the chart data To obtain port services information RayChart 420/420D Chartplotter Working with waypoints SafetyOperation Introduction Placing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Erasing a waypoint Moving a waypoint Working with routes Creating a new route Saving the Current Route Clearing the current route from the screen Retrieving a route from the database Editing a route Displaying route leg and waypoint informationErasing or renaming a route Inserting/deleting waypoints in a route To add a waypoint to the end of a route Following routes and going to target points Follow a route Reverse a route Join a route Target point arrivalAlter a route Restart Cross Track Error XTE Advance to a waypoint Going to an individual target Go to a waypoint Go to cursor Go to a port Changing the display mode Stop follow or stop goto CDI display BDI display BRG 234 T RNG 12.4 nm Waypoint data COG 230 T SOG 6.8 Kts Navigation data Time Date 26/01/99 Time/Date Data Managing database lists Transferring waypoints and routesDisplayed waypoints Using tracks WPT/ROUTE Transfer Setting up a track Setting SmartRoute‰ Man Overboard MOBClearing the current track Alarms Range key operates normally to change chart scale Setting up the chartplotter System set up parameters Menu Options Factory New Default Setting Units Bearing modeKey beep Variation Simulated SOG Time offsetLanguage Simulated COG Chart set up parameters Parameter Options Factory New Default Setting Orientation Plotter modeWaypoint symbol Show waypoints Chart text Anchor alarmXTE alarm Screen amplifier Depth contours 10M Chart boundariesDepth contours 5M Depth contours 20M GPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter Installation EMC Installation Guidelines Connections to other equipment Unpacking and inspecting the componentsSuppression ferrites Registering this Product LocationItems Missing? Selecting the best location 122 mm 4.8 Trunnion yoke mounting Connecting to other equipmentMounting the chartplotter Panel mounting D47221 Cabling Chartplotter connectorsGPS connector POWER/NMEA connector System Check and Initial Switch On Function Color Initial Switch On System Check Checking the Chartplotter Operation RayChart 420/420D Chartplotter Servicing and Safety Maintenance & fault findingMaintenance Routine checks Resetting the system Two types of reset are available for the Chartplotter Problem solving Fault finding For product repair and service How to contact Raytheon Marine USFor accessories and parts Worldwide support How to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Appendix a Specification Y2K RayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 Appendix C List of abbreviations COG RayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Limited Warranty Certificate Warranty Limitations Factory Service Centers United States of America