Menu Options Factory New Default Setting | Raymarine 420D specs

4-2				RayChart 420/420D Chartplotter

3.Use trackpad up/down to move the highlight up or down the list.

4.When the required parameter is highlighted, use trackpad left/right to step through the settings.

5.When you have reset to the required values, press ENTER to implement the change and return to the set up function bar.

6.Press CLEAR to clear the function bar and return to the chart display.

Note: You can return all the settings to their original factory settings, if required, by performing a factory reset as described in Chapter 6.

The following table lists the System menus and their options, shows the factory default settings and provides space for you to make a note of your new settings. Each parameter is described in the following subsections.

Menu	Options	Factory	New
		Default	Setting

BEARING MODE	MAGnetic	TRUE
	TRUE

KEY BEEP	OFF/ON	ON

DISTANCE UNITS	NAUTICAL MILES (nm)	NAUTICAL MILES
	KILOMETRES (km)
	STATUTE MILES (sm)

SPEED UNITS	KNOTS	KNOTS
	KILOMETRES PER HOUR (KPH)
	MILES PER HOUR (MPH)

DEPTH UNITS	METRES	METRES
	FEET
	FATHOMS

VARIATION	30°W to 30°E (1° steps)	0.0E

Image 63

Raymarine 420D manual Menu Options Factory New Default Setting

Contents

Distributed by Raychart 420/ 420D Chartplotter Page Safety Notices RayChart 420 and 420D Chartplotter Owner’s Handbook United States Warranty PrefaceEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Overview IntroductionHow this Handbook is organised Chartplotter display GeneralDisplay functions Display options Operating controls 128 nm Trackpad and cursor Function bar Dedicated keys Database lists Pop-up menus Getting started Conventions usedSimulator Switching on/off Chart simulator Controlling the display Selecting the display mode Time 1234 Date 26/01/99 Using Find Ship Moving around the chart Status Bar Chart range Changing the chart scale 128 nm Using Navionics Nav-Chart cards Inserting a Nav-Chart card Removing a Nav-Chart card Displaying the chart dataDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Introduction SafetyOperation Working with waypoints Placing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Moving a waypoint Erasing a waypoint Working with routes Creating a new route Saving the Current Route Retrieving a route from the database Clearing the current route from the screen Displaying route leg and waypoint information Erasing or renaming a routeEditing a route To add a waypoint to the end of a route Inserting/deleting waypoints in a route Following routes and going to target points Reverse a route Follow a route Target point arrival Alter a routeJoin a route Advance to a waypoint Restart Cross Track Error XTE Go to a waypoint Going to an individual target Go to a port Go to cursor Stop follow or stop goto Changing the display mode CDI display BDI display Waypoint data BRG 234 T RNG 12.4 nm Navigation data COG 230 T SOG 6.8 Kts Time/Date Data Time Date 26/01/99 Transferring waypoints and routes Displayed waypointsManaging database lists WPT/ROUTE Transfer Using tracks Setting Setting up a track Man Overboard MOB Clearing the current trackSmartRoute‰ Range key operates normally to change chart scale Alarms System set up parameters Setting up the chartplotter Menu Options Factory New Default Setting Variation Bearing modeKey beep Units Simulated COG Time offsetLanguage Simulated SOG Chart set up parameters Parameter Options Factory New Default Setting Show waypoints Plotter modeWaypoint symbol Orientation Screen amplifier Anchor alarmXTE alarm Chart text Depth contours 20M Chart boundariesDepth contours 5M Depth contours 10M GPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter EMC Installation Guidelines Installation Unpacking and inspecting the components Suppression ferritesConnections to other equipment Selecting the best location LocationItems Missing? Registering this Product 122 mm 4.8 Panel mounting Connecting to other equipmentMounting the chartplotter Trunnion yoke mounting D47221 Chartplotter connectors GPS connectorCabling POWER/NMEA connector Function Color System Check and Initial Switch On System Check Initial Switch On Checking the Chartplotter Operation RayChart 420/420D Chartplotter Routine checks Maintenance & fault findingMaintenance Servicing and Safety Two types of reset are available for the Chartplotter Resetting the system Fault finding Problem solving Worldwide support How to contact Raytheon Marine USFor accessories and parts For product repair and service How to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Y2K Appendix a Specification RayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 COG Appendix C List of abbreviations RayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Warranty Limitations Limited Warranty Certificate United States of America Factory Service Centers