Maintenance & fault finding, Routine checks | Raymarine 420D

Chapter 6: Maintenance & Fault Finding	6-1

Chapter 6: Maintenance & fault finding

This chapter provides information on routine maintenance and on possible causes of problems you may experience with your RayChart 420 Chartplotter.

6.1 Maintenance

Warnings

The chartplotter contains high voltage and specialised circuits only accessible to qualified service technicians - there are no user serviceable parts or adjustments and the operator should not attempt to service the equipment. The operator should not remove the rear cover .

Routine checks

The Chartplotter is a sealed unit. Maintenance procedures are therefore limited to the following periodical checks:

•Wipe the display unit clean with a damp cloth.

•Examine the cables for signs of damage, such as chafing, cuts or nicks.

•Check that the cable connectors are firmly attached and that the connections to the vessel’s dc power are clean and tight.

•Ensure that the cartridge cover is always fitted correctly.

Note: Never use chemical or abrasive materials to clean the chartplotter. If the unit is dirty, wipe it with a clean, damp cloth.

Servicing and Safety

Raytheon equipment should be serviced only by authorised Raytheon service technicians. They will ensure that service procedures and replacement parts used will not affect performance. There are no user serviceable parts in any Raytheon product.

Some products generate high voltages, so never handle the cables/connectors when power is being supplied to the equipment.

When powered up, all electrical equipment produces electromagnetic fields. These can cause adjacent pieces of electrical equipment to interact with one another, with a consequent adverse effect on operation. In order to minimise these effects and enable you to get the best possible performance from your Raytheon equipment, guidelines are given in the installation instructions, to enable you to ensure minimum interaction between different items of equipment, i.e. ensure optimum Electromagnetic Compatibility (EMC).

Image 86

Raymarine 420D manual Maintenance & fault finding, Routine checks, Servicing and Safety

Contents

Distributed by Raychart 420/ 420D Chartplotter Page RayChart 420 and 420D Chartplotter Owner’s Handbook Safety Notices United States EMC Conformance WarrantyPreface RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D How this Handbook is organised OverviewIntroduction Display functions Chartplotter displayGeneral Operating controls Display options Trackpad and cursor 128 nm Dedicated keys Function bar Pop-up menus Database lists Simulator Getting startedConventions used Switching on/off Chart simulator Selecting the display mode Controlling the display Time 1234 Date 26/01/99 Moving around the chart Using Find Ship Changing the chart scale Status Bar Chart range Using Navionics Nav-Chart cards 128 nm Inserting a Nav-Chart card Displaying chart information Removing a Nav-Chart cardDisplaying the chart data To obtain port services information RayChart 420/420D Chartplotter Working with waypoints SafetyOperation Introduction Placing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Erasing a waypoint Moving a waypoint Working with routes Creating a new route Saving the Current Route Clearing the current route from the screen Retrieving a route from the database Editing a route Displaying route leg and waypoint informationErasing or renaming a route Inserting/deleting waypoints in a route To add a waypoint to the end of a route Following routes and going to target points Follow a route Reverse a route Join a route Target point arrivalAlter a route Restart Cross Track Error XTE Advance to a waypoint Going to an individual target Go to a waypoint Go to cursor Go to a port Changing the display mode Stop follow or stop goto CDI display BDI display BRG 234 T RNG 12.4 nm Waypoint data COG 230 T SOG 6.8 Kts Navigation data Time Date 26/01/99 Time/Date Data Managing database lists Transferring waypoints and routesDisplayed waypoints Using tracks WPT/ROUTE Transfer Setting up a track Setting SmartRoute‰ Man Overboard MOBClearing the current track Alarms Range key operates normally to change chart scale Setting up the chartplotter System set up parameters Menu Options Factory New Default Setting Units Bearing modeKey beep Variation Simulated SOG Time offsetLanguage Simulated COG Chart set up parameters Parameter Options Factory New Default Setting Orientation Plotter modeWaypoint symbol Show waypoints Chart text Anchor alarmXTE alarm Screen amplifier Depth contours 10M Chart boundariesDepth contours 5M Depth contours 20M GPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter Installation EMC Installation Guidelines Connections to other equipment Unpacking and inspecting the componentsSuppression ferrites Registering this Product LocationItems Missing? Selecting the best location 122 mm 4.8 Trunnion yoke mounting Connecting to other equipmentMounting the chartplotter Panel mounting D47221 Cabling Chartplotter connectorsGPS connector POWER/NMEA connector System Check and Initial Switch On Function Color Initial Switch On System Check Checking the Chartplotter Operation RayChart 420/420D Chartplotter Servicing and Safety Maintenance & fault findingMaintenance Routine checks Resetting the system Two types of reset are available for the Chartplotter Problem solving Fault finding For product repair and service How to contact Raytheon Marine USFor accessories and parts Worldwide support How to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Appendix a Specification Y2K RayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 Appendix C List of abbreviations COG RayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Limited Warranty Certificate Warranty Limitations Factory Service Centers United States of America