Chapter 2: Using the Tiller Pilot

25

To cancel the wind shift alarm:

check that the new course does not take the boat into danger

press standby and auto together momentarily to accept the alarm and reset the wind shift alarm value to the current compass heading

Operating hints for WindTrim mode

WindTrim filters the wind vane output. This provides optimum response for offshore conditions where genuine shifts in wind direction occur gradually.

In gusting and unsteady inshore conditions, it is best to sail a few degrees further off the wind so that changes in apparent wind direction can be tolerated.

It is important to minimize the amount of standing helm through careful sail trimming and positioning of the mainsheet traveller.

It is recommended that the headsail and mainsail are reefed a little early rather than too late.

2 Using the Tiller Pilot

Page 29
Image 29
Raymarine ST1000 Plus & ST2000 Plus manual Operating hints for WindTrim mode