Chapter 4: Installing the Tiller Pilot | 45 |
4.3 Cabling and socket installation
Both power and data are supplied to the tiller pilot via a waterproof plug and socket. The plug comes ready assembled and the socket can be mounted in the cockpit area adjacent to the tiller pilot.
+12 V DC (brown, pin 1)
0 V (blue, pin 2)
NMEA + (white, pin 6)
NMEA - (green, pin 5)
SeaTalk data (yellow, pin 4)
Mounting the socket
Install the tiller pilot socket as follows:
|
| Floating nut |
| ||
| Plug |
|
|
| |
| Socket |
|
|
| |
| Gasket |
| Retaining ring |
| |
| Cable |
|
|
| |
|
|
| Installed socket |
| |
|
|
| Screw |
| |
| Rubber cap |
|
| 4 Installing | |
|
|
| the | ||
1. | Attach the template (provided at the back of this handbook) to the | ||||
Tiller | |||||
| selected bulkhead. |
|
| ||
|
|
| Pilot | ||
2. Carefully drill a 21 mm (53/64 in) clearance hole for the cable boss. | |||||
3. Drill 4 pilot holes (2.5 mm or 3/ |
| in) for the |
| ||
| 32 |
|
| ||
