Raymarine ST1000 Plus & ST2000 Plus Nmea cabling, Remote control cabling, Recognized Nmea data

Chapter 4: Installing the Tiller Pilot 49

Remote control cabling

If required, you can operate the tiller pilot using:

•a full-function ST600R remote control unit (part no: A12016), or

•a SeaTalk hand-held remote control (part no: Z101)

The following illustration shows how to connect a remote control.

12 A fuse

SeaTalk instruments

SeaTalk cable*

Supply (0 V)	Socket
	Yellow (SeaTalk data)
Supply (+12 V DC)	Screen (SeaTalk 0 V)
	Red (SeaTalk 12 V)
	with 5 A fuse
	SeaTalk cable
	ST600R remote
SeaTalk	Z101 remote
socket

or

*If you only need to connect a remote, wire this SeaTalk cable into the tiller pilot socket

D3279-2

NMEA cabling

If required, you can connect a NMEA navigator or wind instrument to the tiller pilot. It can then use this information for Track and WindTrim modes.

Recognized NMEA data

The following table lists the recognized NMEA sentences.

4 Installing the Tiller Pilot