RCA L50000 manual Complete the Interactive Setup, Put Batteries in the Remote Control

Chapter 2 Connections & Setup

POWER

3	Put Batteries in the Remote Control
Step
	Follow these steps whenever you need to install or change the batteries in your
	TV’s remote control.
	1. Remove the cover from the battery compartment.
	2. Insert batteries into the battery compartment, matching the + and – end of
	each battery (look for the diagram inside of the battery compartment).
	3. Replace the cover.
4	Plug in and turn on
Step
	Plug one end of the power cord into the back of the television. Plug the other end
	into a wall outlet. Be sure to insert the plugs completely.
	Note: Plug your television directly into a wall outlet or power strip (or surge
	protector) — don’t plug the TV into a wall outlet that is controlled by a light
	switch.
	To turn on the TV, press the ON•OFF button. Your LCOS television has to check
	many functions the first time you turn it on (somewhat like a computer booting
	up). You’ll notice that it takes a minute or so for the TV to completely warm up.
	Be patient — it’s worth the wait!

Arrow buttons and the OK button

FORMAT		GO
		BACK
TEST		AM•FM
GUIDE		INFO
LEVEL -	OK	LEVEL +
MENU		CLEAR
PROGRAM
1	2	3

5 Step

Complete the Interactive Setup

The Interactive setup appears when you turn on your TV for the first time. Press the arrow buttons (up, down, left, and right) on your remote control to highlight a menu item. Press OK to select the highlighted item.

Follow the steps to configure the basics of your system, such as setting up the time and day, searching for available channels, and setting up speakers. If you ever need to run the Interactive Setup again or make adjustments, go to the Assistance menu that’s found in the main menu (for more details, go to page 137 in Chapter 7).

23