RCA L50000 manual How to Use the Volume Lock Feature, Locking the Volume VOL Lock

Chapter 3 The Remote Control

Display window

	DIRECTV	ON•OFF		TV
	VCR			DVD
	1
	VCR			AUX
	2	AUD
	M1			M3
Component		M2
	L1			L3
buttons		L2		FRONT
	MUTE			SKIP
		CH +
	VOL -			VOL +
	REAR	CH -		CENTER
	FORMAT			GO
				BACK
	TEST			AM•FM
	GUIDE			INFO
The OK	LEVEL -	OK		LEVEL +
button	MENU			CLEAR
	PROGRAM
	1	2		3
	4	5		6
The down	7	8		9
arrow button	INPUT	0		ANT
				FUNCTION
	REV	PLAY		FWD
	REC	STOP		PAUSE
		SWAP	CH
	PIP		CTRL	WHO
		DELAY
	DSP			DSP
	ON•OFF			MODE

Backlight button

5.Repeat steps 4 and 5 to delete more functions.

6.When the selected functions are deleted press the CLEAR button to exit the IR DELETE programming mode. (EXIT SETUP appears in the remote’s display and the remote returns to its original operation mode).

Notes:

•Press the CLEAR button at any time to exit the programming mode (EXIT SETUP will appear to confirm that no new codes have been entered).

•If about 30 seconds passes before a button is pressed, the LCD display window will stop transmission to conserve battery life. If this occurs, restart from step 1.

•To delete all learned keys at one time, do an operations reset or a manufacturer’s reset (go to page 58 for instructions).

How to Use the Volume Lock Feature

This programming mode will lock the volume of the components that have volume control. You may need to experiment with your system since products made by different manufacturers work differently.

Locking the Volume (VOL LOCK)

1.Press and hold (the backlight button) until CODE SET appears in the remote’s display.

2.Step through the programming menu by pressing the down arrow button until VOL LOCK appears in the remote’s display window, then press the OK button.

3.The display message TO MODE appears, prompting you to enter the component to apply the volume lock.

4.Push the component button of your choice to apply the VOL LOCK mode.

5.If you’ve pressed a valid component button, SUCCESS appears, followed by

EXIT SETUP.

52