RCA L50000 manual RF Jacks and Coaxial Cables F-type Good Video and Audio

Chapter 2 Connections & Setup

Audio/Video Jacks

RF Jack

Phone Jacks

Audio/Video Jacks and Cables (RCA-type) — Very Good Video and Audio

These jacks are used for most audio/video connections between components. The audio/video jacks are often color coded (yellow for video, red for right audio, and white for left audio). This is also called composite video.

Note: If your component has only one input for audio (mono), connect it to the left (white L/Mono) audio jack on the TV and don’t connect the right audio part of the cable.

RF Jacks and Coaxial Cables (F-type) — Good Video and Audio

The RF jacks are necessary for reception of off-air broadcasts, cable, and DIRECTV signals.

These jacks are required for antenna or cable connections. The RF and coaxial jacks on the TV are labeled SATELLITE IN, ANTENNA A IN, and ANTENNA B IN.

An RG-6 coaxial cable is required for all satellite signal distribution.

Telephone Jack and Cord (optional)

If you choose to subscribe to DIRECTV® programming, a phone line connection is used to periodically call out to DIRECTV on a toll free number. Connect a telephone line cord to the PHONE jack on the back of your TV and to an RJ11 type modular jack (the most common type of phone jack and might look like the one pictured here). If you don’t have a modular jack, call your local telephone company to find out how to get one installed.

26