Chapter 6 The Menu System

Mute

Turn Mute on (select Sound Off) to set the TV’s volume to its minimum level (another way to set the volume to its minimum level is to press MUTE on the remote control).

Tone Controls

Lets you adjust the Bass, Treble and Balance. Use the right and left arrow buttons on your remote to adjust the sliders. Increasing the bass and treble output from the TV’s internal speakers increases the low and high tones, respectively. Adjusting the balance shifts the audio output between the left and right internal speakers.

Audio Processor

Displays a choice list of available audio modes, which control the way the sound comes through your speakers.

To create settings:

1.Press MENU to access the main menu.

2.Select Audio, and then select Audio Processor. Depending on your speaker setup, any combination of the following options will appear:

Mono Plays the sound in monophonic audio only. This should only be used when receiving broadcasts where distance from the broadcasters makes the stereo signal weak. The channel banner displays the word Mono when you tune to a program that is broadcast in mono.

110

Page 114
Image 114
RCA L50000 manual Mute, Tone Controls, Audio Processor, 110