RCA L50000 manual Display Messages action messages

Chapter 3 The Remote Control

Display Messages (action messages)

CLR SETUP Prompts you that setup control is going to be cleared.

CONFIRM Prompts you to confirm or take action on an operation.

DELETING Information from the selected key is being deleted.

ENTER SEQ Prompts you to enter a button stroke for the macro sequence.

FROM MODE Prompts you to enter the source mode in Mode Reassignment.

LEARNING Prompts you to start and proceed learning the IR data into a button.

OK TO END Prompts you to press (and hold down for at least 3 seconds) the OK button to return to normal operation.

SEL KEY Prompts you to select a button.

SEL MACKEY (Select Macro Key) Prompts you to enter a button that will be designated as the Macro button.

TO MODE Prompts you to enter the destination mode in Mode Reassignment.

43