RCA L50000 manual 146, What you’ll need to get started

Chapter 7 Help & Assistance

SATELLITE

IN

ACCESS

CARD

DIGITAL

PHONE AUDIO OUT

JACK

ANTENNA B	AUDIO
	VIDEO L	R	S-VIDEO	COMPONENT VIDEO INPUT
IN
	INPUT1			AUDIO	Y	P	P
				R
ANTENNA A	INPUT2
IN				L

INPUT3

POWER

	AUDIO OUTPUTS
FIXED		VARIABLE
L	R	L	R
	EXT SPEAKERS		EXT

+ + INT

R L

What you’ll need to get started:

___ A flashlight

___ A flat-head screwdriver

___ A lamp replacement unit (part number 252115)

___ The box that the lamp replacement unit came in.

1.	Read the precautions listed above.
2.	Make sure your hands are dry and clean before you begin replacing the lamp.
3.	Unplug the TV’s power cord from the wall outlet (or power strip). Unplug the
	power cord from the back of the TV.
4.	Put the power cord far away from the TV. Taking this precaution will ensure
	that no one plugs in the TV if you walk away from it, or when you’re waiting
	for the lamp unit to cool, or when you’re installing the new lamp.
5.	Wait 30 minutes so the lamp can thoroughly cool. If you don’t wait at least 30
	minutes, you risk getting injured!
6.	After 30 minutes, go to the back of the TV set and find the lamp-unit access
	door (located in the lower right corner of the TV). Read the precautions on the

Lamp assembly unit access door

door (you may need a flashlight).

Note: Do not attempt to repair the lamp. Do not open the lamp assembly unit

— leave the lamp in its casing.

Continues on next page...

146