RCA L50000 manual How to Reset the Remote, Operations Reset, Manufacturing Reset

Chapter 3 The Remote Control

DIRECTV	ON•OFF		TV
VCR			DVD
1
VCR			AUX
2	AUD
M1			M3
	M2
L1			L3
	L2
			FRONT
MUTE			SKIP
	CH +
VOL -			VOL +
REAR	CH -		CENTER
FORMAT			GO
			BACK
TEST			AM•FM
GUIDE			INFO
LEVEL -	OK		LEVEL +
MENU			CLEAR
PROGRAM
1	2		3
4	5		6
7	8		9
INPUT	0		ANT
			FUNCTION
REV	PLAY		FWD
REC	STOP		PAUSE
	SWAP	CH
PIP		CTRL	WHO
	DELAY
DSP			DSP
ON•OFF			MODE

How to Reset the Remote

Operations Reset

Operations reset clears all programming from the remote control EXCEPT the buttons you’ve programmed to operate other components.

1.Press and hold (the backlight button) until CODE SET appears in the remote’s display.

2.Step through the programming menu by pressing the down arrow button until OPS REST appears in the remote’s display, then press the OK button.

3.Once you press the OK button, CLR SETUP appears until the OK button is pressed again.

4.After the OK button has been pressed, the remote will perform a complete Operations Reset. Once the Operations Reset is complete the remote will exit the Operations Reset mode and return to its normal operation.

Note: Press the CLEAR button at any time to exit. EXIT SETUP will appear and the remote will return to its normal operation.

Manufacturing Reset

The Manufacturing Reset returns your remote to the way it was when it was packed with product at the manufacturing facility. All programming will be cleared.

1.Press and hold (the backlight button) until CODE SET appears in the remote’s display.

2.Immediately press and release the RECORD button. The remote automatically enters the programming mode where the Manufacturing Reset will be accessed.

3.Step through the programming menu by pressing the down arrow button until MFR RESET appears in the remote’s display, then press the OK button.

58