Troubleshooting

D Load paper by repeating steps B and C.

Note

The tray can hold up to 4,000 sheets.

E Close the top cover of the large capacity tray (LCT).Loading Paper in theInterposer

Important

Load paper on the side already printed (the side you want as

5 front).

Load paper in the interposer in the same orientation as paper in the paper tray.

The staple or punching location will be on the left side of the paper, when you are facing the machine.

Do not place anything on top of or leave documents on the sensor. This may lead to the paper size not being correctly scanned or paper jams.

When using the Z-fold function, the paper in the interposer must be of the same size as the prints after they have been Z-folded. If the pa- per in the interposer is larger than the Z-folded sheets, a misfeed might occur.

A Load the paper.

B Adjust the paper guides to the paper size.

98