Ricoh 2051/2060/2075 To locate the folder manually, Using Browse Network to locate the folder, Note, Note, Note, Note, [OK], Note, Note, Press, [SMB], Press, [Exit], Reference

Registering Folders

G Press [Specify Other Auth. Info] on the right side of Folder Authenti- cation.

Note

❒When [Do not Specify] is selected, the SMB User Name and SMB Password that you have speci- fied in Default User Name/Pass- word (Send) of File Transfer settings applies. For details, see Network Guide.

H Press [Change] under Login User Name.

I Enter the login user name, and then press [OK].

Reference

p.133 “Entering Text”

J Press [Change] under Login Pass- word.

K Enter the password, and then press [OK].

Note

❒You can enter up to 128 charac- ters for the password.

L Press [OK].

M Press [Folder].

N Confirm that [SMB] is selected.

Note

❒To specify a folder, you can ei- ther enter the path manually or locate the folder by browsing the network.

Reference

p.79 “To locate the folder manually ”

p.79 “Using Browse Network to locate the folder”

To locate the folder manually

APress [Change] under Path.

BEnter the path where the folder is located.

Note	4
❒ Enter the path using this for-
mat: “\\ServerName\Share-

Name\PathName”.

❒You can also enter an IP ad- dress.

❒You can enter a path using up to 128 characters.

CPress [OK].

Note

❒If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the path again.

Using Browse Network to locate the folder

APress [Browse Network].

The client computers sharing the same network as the ma- chine appear.

Note

❒If you have already specified your user name and pass- word in steps F to L, the Browse Network display only lists client computers you are authorized to access.

BSelect a client computer. Shared folders under it appear.

79